USB bellek Mount edilemiyor

2

277726

Kilopat
Katılım
3 Eylül 2019
Mesajlar
1.944
Makaleler
4
Çözümler
16
  • Lsblk kodunda, USB ilk taktığım zaman gözüküyor ama 2-3 dakika sonra kayboluyor.
  • Df kodunda, ilk başta gözüküyordu ama dd modunda formatlamayı denedikten sonra ismi loop0 oldu ve 3.9GB yazıyor.
  • Şimdi başka bir bilgisayar da deniyorum ve /dev/sdb 28.9GB olarak görünüyor ve 3 Part'a ayrılmış biçimde.

[CODE title="format denemesi"]sudo mkfs.vfat /dev/sdb
mkfs.vfat: unable to open /dev/sdb: No medium found[/CODE]
[CODE title="fsck"]fsck.ext2: No such device or address while trying to open /dev/sdb
Possibly non-existent or swap device?[/CODE]
[CODE title="fsck(new)"]ext2fs_open2: Bad magic number in super-block
fsck.ext2: Superblock invalid, trying backup blocks...
fsck.ext2: Bad magic number in super-block while trying to open /dev/sdb
The superblock could not be read or does not describe a valid ext2/ext3/ext4
filesystem. If the device is valid and it really contains an ext2/ext3/ext4
filesystem (and not swap or ufs or something else), then the superblock
is corrupt, and you might try running e2fsck with an alternate superblock:
e2fsck -b 8193 <device>
or
e2fsck -b 32768 <device>
[/CODE]
 
Son düzenleme:
Tarihe göre sırala Puana göre sırala
[CODE title="dmesg"]sudo dmesg | tail -20
[ 104.353013] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 104.353015] usb 2-3: Product: DataTraveler 3.0
[ 104.353016] usb 2-3: Manufacturer: Kingston
[ 104.353017] usb 2-3: SerialNumber: Unvisible for privacy concern
[ 104.396453] usb-storage 2-3:1.0: USB Mass Storage device detected
[ 104.396652] scsi host9: usb-storage 2-3:1.0
[ 104.396836] usbcore: registered new interface driver usb-storage
[ 104.398678] usbcore: registered new interface driver uas
[ 105.460656] scsi 9:0:0:0: Direct-Access Kingston DataTraveler 3.0 PQ: 0 ANSI: 6
[ 105.460861] sd 9:0:0:0: Attached scsi generic sg1 type 0
[ 105.461132] sd 9:0:0:0: [sdb] 60437492 512-byte logical blocks: (30.9 GB/28.8 GiB)
[ 105.461287] sd 9:0:0:0: [sdb] Write Protect is off
[ 105.461289] sd 9:0:0:0: [sdb] Mode Sense: 4f 00 00 00
[ 105.461442] sd 9:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 105.481706] sdb: sdb1 sdb2 sdb3
[ 105.505372] sd 9:0:0:0: [sdb] Attached SCSI removable disk
[ 111.639606] audit: type=1101 audit(1649036693.037:272): pid=5535 uid=1000 auid=1000 ses=2 msg='op=PAM:accounting grantors=pam_unix acct="privacy" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/4 res=success'
[ 111.639680] audit: type=1123 audit(1649036693.037:273): pid=5535 uid=1000 auid=1000 ses=2 msg='cwd="/home/privacy" cmd="dmesg" exe="/usr/bin/sudo" terminal=pts/4 res=success'
[ 111.639824] audit: type=1110 audit(1649036693.037:274): pid=5535 uid=1000 auid=1000 ses=2 msg='op=PAM:setcred grantors=pam_env,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/4 res=success'
[ 111.641507] audit: type=1105 audit(1649036693.039:275): pid=5535 uid=1000 auid=1000 ses=2 msg='op=PAM:session_open grantors=pam_keyinit,pam_limits,pam_keyinit,pam_limits,pam_systemd,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/4 res=success'

İkinci deneme;

sudo dmesg | tail -20
[ 209.033979] usb 2-3: Device not responding to setup address.
[ 209.449962] audit: type=1100 audit(1649036790.847:281): pid=5610 uid=1000 auid=1000 ses=2 msg='op=PAM:authentication grantors=pam_localuser acct="root" exe="/usr/sbin/userhelper" hostname=? addr=? terminal=? res=success'
[ 209.449987] audit: type=1101 audit(1649036790.847:282): pid=5610 uid=1000 auid=1000 ses=2 msg='op=PAM:accounting grantors=pam_permit acct="root" exe="/usr/sbin/userhelper" hostname=? addr=? terminal=? res=success'
[ 213.203299] usb 2-3: Device not responding to setup address.
[ 213.412019] usb 2-3: device not accepting address 7, error -71
[ 217.532956] usb 2-3: Device not responding to setup address.
[ 221.702796] usb 2-3: Device not responding to setup address.
[ 221.908043] usb 2-3: device not accepting address 8, error -71
[ 221.915911] usb usb2-port3: attempt power cycle
[ 226.994067] usb 2-3: Device not responding to setup address.
[ 231.163349] usb 2-3: Device not responding to setup address.
[ 231.372037] usb 2-3: device not accepting address 9, error -71
[ 235.493007] usb 2-3: Device not responding to setup address.
[ 239.662309] usb 2-3: Device not responding to setup address.
[ 239.868010] usb 2-3: device not accepting address 10, error -71
[ 239.875908] usb usb2-port3: unable to enumerate USB device
[ 243.099959] audit: type=1101 audit(1649036824.497:283): pid=5662 uid=1000 auid=1000 ses=2 msg='op=PAM:accounting grantors=pam_unix acct="privacy" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/4 res=success'
[ 243.100039] audit: type=1123 audit(1649036824.498:284): pid=5662 uid=1000 auid=1000 ses=2 msg='cwd="/home/privacy" cmd="dmesg" exe="/usr/bin/sudo" terminal=pts/4 res=success'
[ 243.100185] audit: type=1110 audit(1649036824.498:285): pid=5662 uid=1000 auid=1000 ses=2 msg='op=PAM:setcred grantors=pam_env,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/4 res=success'
[ 243.101804] audit: type=1105 audit(1649036824.499:286): pid=5662 uid=1000 auid=1000 ses=2 msg='op=PAM:session_open grantors=pam_keyinit,pam_limits,pam_keyinit,pam_limits,pam_systemd,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/4 res=success'
[/CODE]
 
Artı 0 Eksi
OzgunP dedi:
Farklı bir USB portuna takmayı dener misin? USB 2.0 altında denediysen ve varsa USB 3.0 destekli bir porta takmayı dene ya da tam tersini yaparsın.
Genişletmek için tıkla...

İki farklı bilgisayarda bile denedim sonuç aynı... Sadece Windows işletim sistemin de deneyemiyorum çünkü Windows yüklü bir sistemim yok. Bence bunu Linux da çözebiliriz çünkü içerisinde sadece Ventoy yüklüydü ve bir gün eski sistemimde distro değiştirecektim ki bozulduğunu anladım. Öncesinde Windows ve çeşitli distrolar içerisine yüklemiştim. Hatta başarılı bir şekilde Windows ve GNU/Linux distrolarını kurmayı başardım. Öylece durduğu yerden bozulması gerçekten şaşırtıcı.

Eşofman üstümün cebinde unuttuğum SanDisk USB çamaşır makinesinda yıkanmasına rağmen hala çalışıyor olup, bunun böyle kendi kendine bozulması :D.
[CODE title="dmesg"]sudo dmesg | grep sdb
[ 6330.485007] sd 9:0:0:0: [sdb] 60437492 512-byte logical blocks: (30.9 GB/28.8 GiB)
[ 6330.485162] sd 9:0:0:0: [sdb] Write Protect is off
[ 6330.485164] sd 9:0:0:0: [sdb] Mode Sense: 4f 00 00 00
[ 6330.485316] sd 9:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 6330.506578] sdb: sdb1 sdb2 sdb3
[ 6330.529224] sd 9:0:0:0: [sdb] Attached SCSI removable disk
[ 6394.891897] sd 9:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_TIME_OUT driverbyte=DRIVER_OK cmd_age=64s
[ 6394.891900] sd 9:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 03 9a 33 b0 00 00 08 00
[ 6394.891903] blk_update_request: I/O error, dev sdb, sector 60437424 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ 6394.892006] blk_update_request: I/O error, dev sdb, sector 60437424 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 6394.892009] Buffer I/O error on dev sdb, logical block 15109356, async page read
[ 6394.892020] blk_update_request: I/O error, dev sdb, sector 60437428 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 6394.892021] Buffer I/O error on dev sdb, logical block 15109357, async page read
[ 6780.597386] sd 9:0:0:0: [sdb] 60437492 512-byte logical blocks: (30.9 GB/28.8 GiB)
[ 6780.597565] sd 9:0:0:0: [sdb] Write Protect is off
[ 6780.597568] sd 9:0:0:0: [sdb] Mode Sense: 4f 00 00 00
[ 6780.597796] sd 9:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 6780.618451] sdb: sdb1 sdb2 sdb3
[ 6780.650351] sd 9:0:0:0: [sdb] Attached SCSI removable disk
[ 6845.331874] sd 9:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_TIME_OUT driverbyte=DRIVER_OK cmd_age=64s
[ 6845.331878] sd 9:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 03 9a 33 b0 00 00 08 00
[ 6845.331880] blk_update_request: I/O error, dev sdb, sector 60437424 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ 6845.331980] blk_update_request: I/O error, dev sdb, sector 60437424 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
[ 6845.331983] Buffer I/O error on dev sdb, logical block 15109356, async page read
[ 6845.331985] Buffer I/O error on dev sdb, logical block 15109357, async page read
[ 7183.157219] sd 9:0:0:0: [sdb] 60437492 512-byte logical blocks: (30.9 GB/28.8 GiB)
[ 7183.157375] sd 9:0:0:0: [sdb] Write Protect is off
[ 7183.157377] sd 9:0:0:0: [sdb] Mode Sense: 4f 00 00 00
[ 7183.157525] sd 9:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 7183.179555] sdb: sdb1 sdb2 sdb3
[ 7183.200343] sd 9:0:0:0: [sdb] Attached SCSI removable disk
[ 7247.835794] sd 9:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_TIME_OUT driverbyte=DRIVER_OK cmd_age=64s
[ 7247.835800] sd 9:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 00 00 50 40 00 00 08 00
[ 7247.835804] blk_update_request: I/O error, dev sdb, sector 20544 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ 7247.835874] sd 9:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK cmd_age=0s
[ 7247.835876] sd 9:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 00 00 00 b4 00 00 08 00
[ 7247.835877] blk_update_request: I/O error, dev sdb, sector 180 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ 7247.835913] sd 9:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK cmd_age=0s
[ 7247.835916] sd 9:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 00 00 50 40 00 00 08 00
[ 7247.835918] blk_update_request: I/O error, dev sdb, sector 20544 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 7247.835922] Buffer I/O error on dev sdb3, logical block 0, async page read
[ 7247.835942] blk_update_request: I/O error, dev sdb, sector 180 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 7247.835943] Buffer I/O error on dev sdb2, logical block 2, async page read
[ 7247.835951] blk_update_request: I/O error, dev sdb, sector 184 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 7247.835953] Buffer I/O error on dev sdb2, logical block 3, async page read
[ 7247.835974] blk_update_request: I/O error, dev sdb, sector 3257592 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ 7247.836009] blk_update_request: I/O error, dev sdb, sector 3257592 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 7247.836011] Buffer I/O error on dev sdb1, logical block 407199, async page read
[/CODE]
Kod: 
cat /sys/block/sdb/size
60437492
 
Son düzenleme:
Artı 0 Eksi
OzgunP dedi:
Aşağıdaki komutta USB bellek gözüküyor mu? Çıktıyı da paylaşırsın.

Kod: 
lsblk -So PATH,SIZE,TRAN,RO,RM

Gparted ile USB belleğe ulaşılabiliyorsa, disk bölümleme tablosunu sıfırmak denenebilir.
Genişletmek için tıkla...

Kod: 
lsblk -So PATH,SIZE,TRAN,RO,RM
PATH       SIZE TRAN   RO RM
/dev/sda 447.1G sata    0  0
/dev/sdb  28.8G usb     0  1
 
Artı 0 Eksi

Benzer konular

Umut Nas
  • Çözüldü
Çözüldü  USB belleğe Linux nasıl kurulur?
4 5 6
Mesaj
56
Görüntüleme
4.831
brk0
B
g0khan yıldırım
USB bellek ile Linux başlatma
Mesaj
5
Görüntüleme
1.061
Focal Fossa
Focal Fossa
Mr Meraklı
USB bellek üzerinden Linux kullanmak
2 3
Mesaj
20
Görüntüleme
24.148
Firehorse MK II
Firehorse MK II
ProPubgGamerAhmet
Linux'ta USB biçimlendirme sonrası USB görünmüyor
Mesaj
0
Görüntüleme
175
ProPubgGamerAhmet
ProPubgGamerAhmet
BugrahanOzdemir
  • Soru
Linux Kurmak İçin Sanal USB Bellek Oluşturmak
Mesaj
3
Görüntüleme
1.360
Teknik124
Teknik124

Bu konuyu görüntüleyen kullanıcılar

Toplam: 2 (üye: 0, misafir: 2)

Technopat Haberler

Yeni konular

Yeni mesajlar

Geri
Yukarı