Pop!_OS ACPI Error yazılarını es geçmek

Bu hata yazıları yüzünden sistemin açılması çok uzun sürüyor, bana zararı yok ama can sıkıcı. Açılışta ACPI hata mesajlarını nasıl es geçebilirim? Loglevel 1 yaptım ama yine bir şey değişmedi. Boot optionsa acpi=off ekleyince de sistem düzgün çalışmıyor, işlemci tek çekirdeğe düşüyor.

[CODE title="journalctl -p 3 -xb"]enes@casper:~$ journalctl -p 3 -xb
-- Journal begins at Wed 2022-03-23 23:59:19 +03, ends at Sun 2022-03-27 15:17:>
Mar 27 15:14:03 casper kernel: x86/cpu: SGX disabled by BIOS.
Mar 27 15:14:03 casper kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.H_EC.>
Mar 27 15:14:03 casper kernel: ACPI Error: Aborting method \_TZ.FNCL due to pre>
Mar 27 15:14:03 casper kernel: ACPI Error: Aborting method \_TZ.FN00._OFF due t>
Mar 27 15:14:03 casper kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.H_EC.>
Mar 27 15:14:03 casper kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.H_EC.>
Mar 27 15:14:03 casper kernel: ACPI Error: Aborting method \_TZ.FNCL due to pre>
Mar 27 15:14:03 casper kernel: ACPI Error: Aborting method \_TZ.FN00._ON due to>
Mar 27 15:14:03 casper kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.H_EC.>
Mar 27 15:14:03 casper kernel: ACPI Error: Aborting method \_TZ.FNCL due to pre>
Mar 27 15:14:03 casper kernel: ACPI Error: Aborting method \_TZ.FN01._ON due to>
Mar 27 15:14:03 casper kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.H_EC.>
Mar 27 15:14:03 casper kernel: ACPI Error: Aborting method \_TZ.FNCL due to pre>
Mar 27 15:14:03 casper kernel: ACPI Error: Aborting method \_TZ.FN02._ON due to>
Mar 27 15:14:03 casper kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.H_EC.>
Mar 27 15:14:03 casper kernel: ACPI Error: Aborting method \_TZ.FNCL due to pre>
Mar 27 15:14:03 casper kernel: ACPI Error: Aborting method \_TZ.FN03._ON due to>
Mar 27 15:14:03 casper kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.H_EC.>
Mar 27 15:14:03 casper kernel: ACPI Error: Aborting method \_TZ.FNCL due to pre>
Mar 27 15:14:03 casper kernel: ACPI Error: Aborting method \_TZ.FN04._ON due to>
Mar 27 15:14:04 casper kernel:
Mar 27 15:14:34 casper kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.H_EC.>
lines 1-23...skipping...
-- Journal begins at Wed 2022-03-23 23:59:19 +03, ends at Sun 2022-03-27 15:17:18 +03. --
Mar 27 15:14:03 casper kernel: x86/cpu: SGX disabled by BIOS.
Mar 27 15:14:03 casper kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.H_EC.ECMD due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/p>
Mar 27 15:14:03 casper kernel: ACPI Error: Aborting method \_TZ.FNCL due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/psparse-529)
Mar 27 15:14:03 casper kernel: ACPI Error: Aborting method \_TZ.FN00._OFF due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/psparse-529)
Mar 27 15:14:03 casper kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.H_EC._REG due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/p>
Mar 27 15:14:03 casper kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.H_EC.ECMD due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/p>
Mar 27 15:14:03 casper kernel: ACPI Error: Aborting method \_TZ.FNCL due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/psparse-529)
Mar 27 15:14:03 casper kernel: ACPI Error: Aborting method \_TZ.FN00._ON due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/psparse-529)
Mar 27 15:14:03 casper kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.H_EC.ECMD due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/p>
Mar 27 15:14:03 casper kernel: ACPI Error: Aborting method \_TZ.FNCL due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/psparse-529)
Mar 27 15:14:03 casper kernel: ACPI Error: Aborting method \_TZ.FN01._ON due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/psparse-529)
Mar 27 15:14:03 casper kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.H_EC.ECMD due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/p>
Mar 27 15:14:03 casper kernel: ACPI Error: Aborting method \_TZ.FNCL due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/psparse-529)
Mar 27 15:14:03 casper kernel: ACPI Error: Aborting method \_TZ.FN02._ON due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/psparse-529)
Mar 27 15:14:03 casper kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.H_EC.ECMD due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/p>
Mar 27 15:14:03 casper kernel: ACPI Error: Aborting method \_TZ.FNCL due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/psparse-529)
Mar 27 15:14:03 casper kernel: ACPI Error: Aborting method \_TZ.FN03._ON due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/psparse-529)
Mar 27 15:14:03 casper kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.H_EC.ECMD due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/p>
Mar 27 15:14:03 casper kernel: ACPI Error: Aborting method \_TZ.FNCL due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/psparse-529)
Mar 27 15:14:03 casper kernel: ACPI Error: Aborting method \_TZ.FN04._ON due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/psparse-529)
Mar 27 15:14:04 casper kernel:
Mar 27 15:14:34 casper kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.H_EC.ECMD due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/p>
Mar 27 15:14:34 casper kernel: ACPI Error: Aborting method \_TZ.FNCL due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/psparse-529)
Mar 27 15:14:34 casper kernel: ACPI Error: Aborting method \_TZ.FN01._ON due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/psparse-529)
Mar 27 15:15:04 casper kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.H_EC.ECMD due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/p>
Mar 27 15:15:04 casper kernel: ACPI Error: Aborting method \_TZ.FNCL due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/psparse-529)
Mar 27 15:15:04 casper kernel: ACPI Error: Aborting method \_TZ.FN04._ON due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/psparse-529)
Mar 27 15:15:34 casper kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.H_EC.ECMD due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/p>
Mar 27 15:15:34 casper kernel: ACPI Error: Aborting method \_TZ.FNCL due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/psparse-529)
Mar 27 15:15:34 casper kernel: ACPI Error: Aborting method \_TZ.FN02._ON due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/psparse-529)
Mar 27 15:16:05 casper kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.H_EC.ECMD due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/p>
lines 1-32































-- Journal begins at Wed 2022-03-23 23:59:19 +03, ends at Sun 2022-03-27 15:17:18 +03. --
Mar 27 15:14:03 casper kernel: x86/cpu: SGX disabled by BIOS.
Mar 27 15:14:03 casper kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.H_EC.ECMD due to previous error (AE_AML_LOOP_TIMEOUT) (20210>
Mar 27 15:14:03 casper kernel: ACPI Error: Aborting method \_TZ.FNCL due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/psparse-529)
Mar 27 15:14:03 casper kernel: ACPI Error: Aborting method \_TZ.FN00._OFF due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/pspars>
Mar 27 15:14:03 casper kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.H_EC._REG due to previous error (AE_AML_LOOP_TIMEOUT) (20210>
Mar 27 15:14:03 casper kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.H_EC.ECMD due to previous error (AE_AML_LOOP_TIMEOUT) (20210>
Mar 27 15:14:03 casper kernel: ACPI Error: Aborting method \_TZ.FNCL due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/psparse-529)
Mar 27 15:14:03 casper kernel: ACPI Error: Aborting method \_TZ.FN00._ON due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/psparse>
Mar 27 15:14:03 casper kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.H_EC.ECMD due to previous error (AE_AML_LOOP_TIMEOUT) (20210>
Mar 27 15:14:03 casper kernel: ACPI Error: Aborting method \_TZ.FNCL due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/psparse-529)
Mar 27 15:14:03 casper kernel: ACPI Error: Aborting method \_TZ.FN01._ON due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/psparse>
Mar 27 15:14:03 casper kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.H_EC.ECMD due to previous error (AE_AML_LOOP_TIMEOUT) (20210>
Mar 27 15:14:03 casper kernel: ACPI Error: Aborting method \_TZ.FNCL due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/psparse-529)
Mar 27 15:14:03 casper kernel: ACPI Error: Aborting method \_TZ.FN02._ON due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/psparse>
Mar 27 15:14:03 casper kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.H_EC.ECMD due to previous error (AE_AML_LOOP_TIMEOUT) (20210>
Mar 27 15:14:03 casper kernel: ACPI Error: Aborting method \_TZ.FNCL due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/psparse-529)
Mar 27 15:14:03 casper kernel: ACPI Error: Aborting method \_TZ.FN03._ON due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/psparse>
Mar 27 15:14:03 casper kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.H_EC.ECMD due to previous error (AE_AML_LOOP_TIMEOUT) (20210>
Mar 27 15:14:03 casper kernel: ACPI Error: Aborting method \_TZ.FNCL due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/psparse-529)
Mar 27 15:14:03 casper kernel: ACPI Error: Aborting method \_TZ.FN04._ON due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/psparse>
Mar 27 15:14:04 casper kernel:
Mar 27 15:14:34 casper kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.H_EC.ECMD due to previous error (AE_AML_LOOP_TIMEOUT) (20210>
Mar 27 15:14:34 casper kernel: ACPI Error: Aborting method \_TZ.FNCL due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/psparse-529)
Mar 27 15:14:34 casper kernel: ACPI Error: Aborting method \_TZ.FN01._ON due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/psparse>
Mar 27 15:15:04 casper kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.H_EC.ECMD due to previous error (AE_AML_LOOP_TIMEOUT) (20210>
Mar 27 15:15:04 casper kernel: ACPI Error: Aborting method \_TZ.FNCL due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/psparse-529)
Mar 27 15:15:04 casper kernel: ACPI Error: Aborting method \_TZ.FN04._ON due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/psparse>
Mar 27 15:15:34 casper kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.H_EC.ECMD due to previous error (AE_AML_LOOP_TIMEOUT) (20210>
Mar 27 15:15:34 casper kernel: ACPI Error: Aborting method \_TZ.FNCL due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/psparse-529)
lines 1-30
[/CODE]

[CODE title="sudo kernelstub -p"]enes@casper:~$ sudo kernelstub -p
[sudo] password for enes:
kernelstub.Config : INFO Looking for configuration...
kernelstub : INFO System information:

OS:..................Pop!_OS 21.10
Root partition:....../dev/sdb8
Root FS UUID:........137fdee1-cf24-4a66-9b8f-9e549ee46ebf
ESP Path:............/boot/efi
ESP Partition:......./dev/sda1
ESP Partition #:.....1
NVRAM entry #:.......-1
Boot Variable #:.....0000
Kernel Boot Options:.loglevel=1 quiet pci=noaer thermal.crt=200 systemd.show_status=false splash
Kernel Image Path:.../boot/vmlinuz-5.16.11-76051611-generic
Initrd Image Path:.../boot/initrd.img-5.16.11-76051611-generic
Force-overwrite:.....False

kernelstub : INFO Configuration details:

ESP Location:................../boot/efi
Management Mode:...............True
Install Loader configuration:..True
Configuration version:.........3

enes@casper:~$
[/CODE]

[CODE title="cat /proc/sys/kernel/printk"]enes@casper:~$ cat /proc/sys/kernel/printk
1 4 1 7
enes@casper:~$ [/CODE]
@OzgunP
Bu da dmesg çıktısı:

[CODE title="dmesg"]enes@casper:~$ sudo su
[sudo] password for enes:
root@casper:/home/enes# dmesg
[ 0.000000] microcode: microcode updated early to revision 0xea, date = 2021-01-06
[ 0.000000] Linux version 5.16.11-76051611-generic ([email protected]) (gcc (Ubuntu 11.2.0-7ubuntu2) 11.2.0, GNU ld (GNU Binutils for Ubuntu) 2.37) #202202230823~1646248261~21.10~2b22243 SMP PREEMPT Wed Mar 2 20:
[ 0.000000] Command line: initrd=\EFI\Pop_OS-137fdee1-cf24-4a66-9b8f-9e549ee46ebf\initrd.img root=UUID=137fdee1-cf24-4a66-9b8f-9e549ee46ebf ro loglevel=1 quiet pci=noaer thermal.crt=200 systemd.show_status=false splash
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Hygon HygonGenuine
[ 0.000000] Centaur CentaurHauls
[ 0.000000] zhaoxin Shanghai
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ 0.000000] signal: max sigframe size: 2032
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000073e04fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000073e05000-0x0000000073e05fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000073e06000-0x0000000073e06fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000073e07000-0x0000000075386fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000075387000-0x0000000075c86fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000075c87000-0x000000008be9dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008be9e000-0x000000008c88dfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000008c88e000-0x000000008cf7dfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000008cf7e000-0x000000008cffdfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000008cffe000-0x000000008cffefff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008cfff000-0x000000008fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fd000000-0x00000000fe7fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000026effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0x73bba018-0x73bca057] usable ==> usable
[ 0.000000] e820: update [mem 0x73bba018-0x73bca057] usable ==> usable
[ 0.000000] e820: update [mem 0x73bb0018-0x73bb9657] usable ==> usable
[ 0.000000] e820: update [mem 0x73bb0018-0x73bb9657] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009dfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000009e000-0x00000000000fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000073bb0017] usable
[ 0.000000] reserve setup_data: [mem 0x0000000073bb0018-0x0000000073bb9657] usable
[ 0.000000] reserve setup_data: [mem 0x0000000073bb9658-0x0000000073bba017] usable
[ 0.000000] reserve setup_data: [mem 0x0000000073bba018-0x0000000073bca057] usable
[ 0.000000] reserve setup_data: [mem 0x0000000073bca058-0x0000000073e04fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000073e05000-0x0000000073e05fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x0000000073e06000-0x0000000073e06fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000073e07000-0x0000000075386fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000075387000-0x0000000075c86fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000075c87000-0x000000008be9dfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000008be9e000-0x000000008c88dfff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000008c88e000-0x000000008cf7dfff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000008cf7e000-0x000000008cffdfff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x000000008cffe000-0x000000008cffefff] usable
[ 0.000000] reserve setup_data: [mem 0x000000008cfff000-0x000000008fffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fd000000-0x00000000fe7fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed84000-0x00000000fed84fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000026effffff] usable
[ 0.000000] efi: EFI v2.50 by INSYDE Corp.
[ 0.000000] efi: ACPI 2.0=0x8cffd014 SMBIOS=0x8c112000 SMBIOS 3.0=0x8c110000 ESRT=0x8c10edd8 MEMATTR=0x7ba01018 RNG=0x8c10cf18 TPMEventLog=0x75c97018
[ 0.000000] efi: seeding entropy pool
[ 0.000000] random: fast init done
[ 0.000000] TPM Final Events table not present
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] DMI: CASPER BILGISAYAR SISTEMLERI.A.S. NIRVANA YENI F650 SERISI NOTEBOOK/F15KR 001, BIOS 203 12/11/2017
[ 0.000000] tsc: Detected 1800.000 MHz processor
[ 0.001017] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.001022] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.001037] last_pfn = 0x26f000 max_arch_pfn = 0x400000000
[ 0.001370] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.003036] last_pfn = 0x8cfff max_arch_pfn = 0x400000000
[ 0.022298] esrt: Reserving ESRT space from 0x000000008c10edd8 to 0x000000008c10ee88.
[ 0.022315] Using GB pages for direct mapping
[ 0.022928] Secure boot disabled
[ 0.022930] RAMDISK: [mem 0x6c6b1000-0x70c9efff]
[ 0.022940] ACPI: Early table checksum verification disabled
[ 0.022945] ACPI: RSDP 0x000000008CFFD014 000024 (v02 CASPER)
[ 0.022953] ACPI: XSDT 0x000000008CFAE188 000134 (v01 CASPER ERA 00000000 01000013)
[ 0.022963] ACPI: FACP 0x000000008CFEC000 00010C (v05 CASPER ERA 00000000 ACPI 00040000)
[ 0.022973] ACPI: DSDT 0x000000008CFB1000 036E70 (v02 CASPER ERA 00000000 ACPI 00040000)
[ 0.022979] ACPI: FACS 0x000000008CF52000 000040
[ 0.022984] ACPI: UEFI 0x000000008CFFC000 000236 (v01 CASPER ERA 00000001 ACPI 00040000)
[ 0.022990] ACPI: UEFI 0x000000008CFFB000 000042 (v01 CASPER ERA 00000002 ACPI 00040000)
[ 0.022995] ACPI: MSDM 0x000000008CFFA000 000055 (v03 CASPER ERA 00000001 ACPI 00040000)
[ 0.023001] ACPI: SSDT 0x000000008CFF9000 0004C3 (v02 CASPER ERA 00001000 ACPI 00040000)
[ 0.023007] ACPI: SSDT 0x000000008CFF8000 000046 (v02 CASPER ERA 00003000 ACPI 00040000)
[ 0.023012] ACPI: TPM2 0x000000008CFF7000 000034 (v03 CASPER ERA 00000000 ACPI 00040000)
[ 0.023018] ACPI: SSDT 0x000000008CFF3000 00380D (v02 CASPER ERA 00003000 ACPI 00040000)
[ 0.023023] ACPI: ECDT 0x000000008CFF2000 0000C1 (v01 CASPER ERA 00000001 ACPI 00040000)
[ 0.023029] ACPI: SSDT 0x000000008CFF1000 000B27 (v02 CASPER ERA 00000000 ACPI 00040000)
[ 0.023034] ACPI: ASF! 0x000000008CFF0000 0000A5 (v32 CASPER ERA 00000001 ACPI 00040000)
[ 0.023040] ACPI: ASPT 0x000000008CFEF000 000034 (v07 CASPER ERA 00000001 ACPI 00040000)
[ 0.023046] ACPI: BOOT 0x000000008CFEE000 000028 (v01 CASPER ERA 00000001 ACPI 00040000)
[ 0.023051] ACPI: DBGP 0x000000008CFED000 000034 (v01 CASPER ERA 00000001 ACPI 00040000)
[ 0.023057] ACPI: HPET 0x000000008CFEB000 000038 (v01 CASPER ERA 00000001 ACPI 00040000)
[ 0.023062] ACPI: APIC 0x000000008CFEA000 0000BC (v03 CASPER ERA 00000001 ACPI 00040000)
[ 0.023068] ACPI: MCFG 0x000000008CFE9000 00003C (v01 CASPER ERA 00000001 ACPI 00040000)
[ 0.023073] ACPI: SLIC 0x000000008CFE8000 000176 (v01 CASPER ERA 00000001 ACPI 00040000)
[ 0.023079] ACPI: SSDT 0x000000008CFB0000 000517 (v02 CASPER ERA 00000000 ACPI 00040000)
[ 0.023084] ACPI: SSDT 0x000000008CFAF000 000DE5 (v02 CASPER ERA 00001000 ACPI 00040000)
[ 0.023090] ACPI: LPIT 0x000000008CFAD000 000094 (v01 CASPER ERA 00000000 ACPI 00040000)
[ 0.023095] ACPI: WSMT 0x000000008CFAC000 000028 (v01 CASPER ERA 00000000 ACPI 00040000)
[ 0.023101] ACPI: SSDT 0x000000008CFAB000 00029F (v02 CASPER ERA 00000000 ACPI 00040000)
[ 0.023106] ACPI: SSDT 0x000000008CFAA000 000346 (v01 CASPER ERA 00000000 ACPI 00040000)
[ 0.023112] ACPI: SSDT 0x000000008CFA6000 003002 (v02 CASPER ERA 00001000 ACPI 00040000)
[ 0.023117] ACPI: SSDT 0x000000008CFA5000 00051E (v02 CASPER ERA 00001000 ACPI 00040000)
[ 0.023123] ACPI: DBGP 0x000000008CFA4000 000034 (v01 CASPER ERA 00000002 ACPI 00040000)
[ 0.023128] ACPI: DBG2 0x000000008CFA3000 000054 (v00 CASPER ERA 00000002 ACPI 00040000)
[ 0.023134] ACPI: SSDT 0x000000008CFA1000 0010B0 (v02 CASPER ERA 00001000 ACPI 00040000)
[ 0.023140] ACPI: SSDT 0x000000008CFA0000 000EDE (v02 CASPER ERA 00003000 ACPI 00040000)
[ 0.023146] ACPI: SSDT 0x000000008CF9C000 003DE6 (v01 CASPER ERA 00001000 ACPI 00040000)
[ 0.023152] ACPI: DMAR 0x000000008CF9B000 0000CC (v01 CASPER ERA 00000001 ACPI 00040000)
[ 0.023157] ACPI: FPDT 0x000000008CF9A000 000044 (v01 CASPER ERA 00000002 ACPI 00040000)
[ 0.023163] ACPI: BGRT 0x000000008CF99000 000038 (v01 CASPER ERA 00000001 ACPI 00040000)
[ 0.023168] ACPI: Reserving FACP table memory at [mem 0x8cfec000-0x8cfec10b]
[ 0.023171] ACPI: Reserving DSDT table memory at [mem 0x8cfb1000-0x8cfe7e6f]
[ 0.023173] ACPI: Reserving FACS table memory at [mem 0x8cf52000-0x8cf5203f]
[ 0.023174] ACPI: Reserving UEFI table memory at [mem 0x8cffc000-0x8cffc235]
[ 0.023176] ACPI: Reserving UEFI table memory at [mem 0x8cffb000-0x8cffb041]
[ 0.023178] ACPI: Reserving MSDM table memory at [mem 0x8cffa000-0x8cffa054]
[ 0.023180] ACPI: Reserving SSDT table memory at [mem 0x8cff9000-0x8cff94c2]
[ 0.023182] ACPI: Reserving SSDT table memory at [mem 0x8cff8000-0x8cff8045]
[ 0.023183] ACPI: Reserving TPM2 table memory at [mem 0x8cff7000-0x8cff7033]
[ 0.023185] ACPI: Reserving SSDT table memory at [mem 0x8cff3000-0x8cff680c]
[ 0.023187] ACPI: Reserving ECDT table memory at [mem 0x8cff2000-0x8cff20c0]
[ 0.023189] ACPI: Reserving SSDT table memory at [mem 0x8cff1000-0x8cff1b26]
[ 0.023190] ACPI: Reserving ASF! table memory at [mem 0x8cff0000-0x8cff00a4]
[ 0.023192] ACPI: Reserving ASPT table memory at [mem 0x8cfef000-0x8cfef033]
[ 0.023194] ACPI: Reserving BOOT table memory at [mem 0x8cfee000-0x8cfee027]
[ 0.023196] ACPI: Reserving DBGP table memory at [mem 0x8cfed000-0x8cfed033]
[ 0.023198] ACPI: Reserving HPET table memory at [mem 0x8cfeb000-0x8cfeb037]
[ 0.023199] ACPI: Reserving APIC table memory at [mem 0x8cfea000-0x8cfea0bb]
[ 0.023201] ACPI: Reserving MCFG table memory at [mem 0x8cfe9000-0x8cfe903b]
[ 0.023203] ACPI: Reserving SLIC table memory at [mem 0x8cfe8000-0x8cfe8175]
[ 0.023205] ACPI: Reserving SSDT table memory at [mem 0x8cfb0000-0x8cfb0516]
[ 0.023207] ACPI: Reserving SSDT table memory at [mem 0x8cfaf000-0x8cfafde4]
[ 0.023209] ACPI: Reserving LPIT table memory at [mem 0x8cfad000-0x8cfad093]
[ 0.023211] ACPI: Reserving WSMT table memory at [mem 0x8cfac000-0x8cfac027]
[ 0.023212] ACPI: Reserving SSDT table memory at [mem 0x8cfab000-0x8cfab29e]
[ 0.023214] ACPI: Reserving SSDT table memory at [mem 0x8cfaa000-0x8cfaa345]
[ 0.023216] ACPI: Reserving SSDT table memory at [mem 0x8cfa6000-0x8cfa9001]
[ 0.023218] ACPI: Reserving SSDT table memory at [mem 0x8cfa5000-0x8cfa551d]
[ 0.023220] ACPI: Reserving DBGP table memory at [mem 0x8cfa4000-0x8cfa4033]
[ 0.023222] ACPI: Reserving DBG2 table memory at [mem 0x8cfa3000-0x8cfa3053]
[ 0.023224] ACPI: Reserving SSDT table memory at [mem 0x8cfa1000-0x8cfa20af]
[ 0.023226] ACPI: Reserving SSDT table memory at [mem 0x8cfa0000-0x8cfa0edd]
[ 0.023228] ACPI: Reserving SSDT table memory at [mem 0x8cf9c000-0x8cf9fde5]
[ 0.023229] ACPI: Reserving DMAR table memory at [mem 0x8cf9b000-0x8cf9b0cb]
[ 0.023231] ACPI: Reserving FPDT table memory at [mem 0x8cf9a000-0x8cf9a043]
[ 0.023233] ACPI: Reserving BGRT table memory at [mem 0x8cf99000-0x8cf99037]
[ 0.023507] No NUMA configuration found
[ 0.023509] Faking a node at [mem 0x0000000000000000-0x000000026effffff]
[ 0.023525] NODE_DATA(0) allocated [mem 0x26efd5000-0x26effffff]
[ 0.024126] Zone ranges:
[ 0.024127] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.024131] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.024134] Normal [mem 0x0000000100000000-0x000000026effffff]
[ 0.024138] Device empty
[ 0.024140] Movable zone start for each node
[ 0.024144] Early memory node ranges
[ 0.024145] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.024148] node 0: [mem 0x0000000000059000-0x000000000009dfff]
[ 0.024150] node 0: [mem 0x0000000000100000-0x0000000073e04fff]
[ 0.024152] node 0: [mem 0x0000000073e07000-0x0000000075386fff]
[ 0.024154] node 0: [mem 0x0000000075c87000-0x000000008be9dfff]
[ 0.024155] node 0: [mem 0x000000008cffe000-0x000000008cffefff]
[ 0.024157] node 0: [mem 0x0000000100000000-0x000000026effffff]
[ 0.024160] Initmem setup node 0 [mem 0x0000000000001000-0x000000026effffff]
[ 0.024167] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.024170] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.024221] On node 0, zone DMA: 98 pages in unavailable ranges
[ 0.030179] On node 0, zone DMA32: 2 pages in unavailable ranges
[ 0.031371] On node 0, zone DMA32: 2304 pages in unavailable ranges
[ 0.031456] On node 0, zone DMA32: 4448 pages in unavailable ranges
[ 0.050448] On node 0, zone Normal: 12289 pages in unavailable ranges
[ 0.050522] On node 0, zone Normal: 4096 pages in unavailable ranges
[ 0.050535] Reserving Intel graphics memory at [mem 0x8e000000-0x8fffffff]
[ 0.050754] ACPI: PM-Timer IO Port: 0x1808
[ 0.050765] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.050768] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.050770] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.050771] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.050773] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.050774] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.050775] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.050777] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.050805] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.050810] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.050813] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.050819] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.050821] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.050832] e820: update [mem 0x7b902000-0x7b95efff] usable ==> reserved
[ 0.050850] TSC deadline timer available
[ 0.050852] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.050897] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.050902] PM: hibernation: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.050905] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x000fffff]
[ 0.050909] PM: hibernation: Registered nosave memory: [mem 0x73bb0000-0x73bb0fff]
[ 0.050913] PM: hibernation: Registered nosave memory: [mem 0x73bb9000-0x73bb9fff]
[ 0.050914] PM: hibernation: Registered nosave memory: [mem 0x73bba000-0x73bbafff]
[ 0.050918] PM: hibernation: Registered nosave memory: [mem 0x73bca000-0x73bcafff]
[ 0.050921] PM: hibernation: Registered nosave memory: [mem 0x73e05000-0x73e05fff]
[ 0.050923] PM: hibernation: Registered nosave memory: [mem 0x73e06000-0x73e06fff]
[ 0.050926] PM: hibernation: Registered nosave memory: [mem 0x75387000-0x75c86fff]
[ 0.050930] PM: hibernation: Registered nosave memory: [mem 0x7b902000-0x7b95efff]
[ 0.050934] PM: hibernation: Registered nosave memory: [mem 0x8be9e000-0x8c88dfff]
[ 0.050935] PM: hibernation: Registered nosave memory: [mem 0x8c88e000-0x8cf7dfff]
[ 0.050936] PM: hibernation: Registered nosave memory: [mem 0x8cf7e000-0x8cffdfff]
[ 0.050940] PM: hibernation: Registered nosave memory: [mem 0x8cfff000-0x8fffffff]
[ 0.050941] PM: hibernation: Registered nosave memory: [mem 0x90000000-0xdfffffff]
[ 0.050943] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.050944] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfcffffff]
[ 0.050945] PM: hibernation: Registered nosave memory: [mem 0xfd000000-0xfe7fffff]
[ 0.050947] PM: hibernation: Registered nosave memory: [mem 0xfe800000-0xfebfffff]
[ 0.050948] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.050949] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.050951] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.050952] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed0ffff]
[ 0.050953] PM: hibernation: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.050955] PM: hibernation: Registered nosave memory: [mem 0xfed1a000-0xfed83fff]
[ 0.050956] PM: hibernation: Registered nosave memory: [mem 0xfed84000-0xfed84fff]
[ 0.050957] PM: hibernation: Registered nosave memory: [mem 0xfed85000-0xfedfffff]
[ 0.050959] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.050960] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
[ 0.050961] PM: hibernation: Registered nosave memory: [mem 0xffa00000-0xffffffff]
[ 0.050964] [mem 0x90000000-0xdfffffff] available for PCI devices
[ 0.050966] Booting paravirtualized kernel on bare hardware
[ 0.050970] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.050983] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.051301] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u262144
[ 0.051316] pcpu-alloc: s212992 r8192 d28672 u262144 alloc=1*2097152
[ 0.051321] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.051376] Fallback order for Node 0: 0
[ 0.051381] Built 1 zonelists, mobility grouping on. Total pages: 2041350
[ 0.051383] Policy zone: Normal
[ 0.051385] Kernel command line: initrd=\EFI\Pop_OS-137fdee1-cf24-4a66-9b8f-9e549ee46ebf\initrd.img root=UUID=137fdee1-cf24-4a66-9b8f-9e549ee46ebf ro loglevel=1 quiet pci=noaer thermal.crt=200 systemd.show_status=false splash
[ 0.051550] Unknown kernel command line parameters "splash", will be passed to user space.
[ 0.052235] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.052587] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.052718] mem auto-init: stackff, heap allocn, heap freeff
[ 0.098054] Memory: 7937124K/8295652K available (16393K kernel code, 4443K rwdata, 10812K rodata, 2752K init, 4936K bss, 358268K reserved, 0K cma-reserved)
[ 0.098063] random: get_random_u64 called from kmem_cache_open+0x2b/0x360 with crng_init=1
[ 0.098322] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.098346] Kernel/User page tables isolation: enabled
[ 0.098377] ftrace: allocating 50824 entries in 199 pages
[ 0.128739] ftrace: allocated 199 pages with 5 groups
[ 0.129986] Dynamic Preempt: voluntary
[ 0.130043] rcu: Preemptible hierarchical RCU implementation.
[ 0.130045] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[ 0.130047] Trampoline variant of Tasks RCU enabled.
[ 0.130048] Rude variant of Tasks RCU enabled.
[ 0.130049] Tracing variant of Tasks RCU enabled.
[ 0.130051] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.130052] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.137016] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16
[ 0.137661] random: crng done (trusting CPU's manufacturer)
[ 0.137713] Console: colour dummy device 80x25
[ 0.137747] printk: console [tty0] enabled
[ 0.137780] ACPI: Core revision 20210930
[ 0.138363] hpet: HPET dysfunctional in PC10. Force disabled.
[ 0.138365] APIC: Switch to symmetric I/O mode setup
[ 0.138368] DMAR: Host address width 39
[ 0.138370] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.138379] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[ 0.138384] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.138389] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.138393] DMAR: RMRR base: 0x0000008c76a000 end: 0x0000008c789fff
[ 0.138396] DMAR: RMRR base: 0x0000008d800000 end: 0x0000008fffffff
[ 0.138398] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
[ 0.138402] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.138404] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.138406] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.140325] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.140328] x2apic enabled
[ 0.140343] Switched APIC routing to cluster x2apic.
[ 0.144391] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x19f2297dd97, max_idle_ns: 440795236593 ns
[ 0.144403] Calibrating delay loop (skipped), value calculated using timer frequency.. 3600.00 BogoMIPS (lpj=7200000)
[ 0.144407] pid_max: default: 32768 minimum: 301
[ 0.148016] LSM: Security Framework initializing
[ 0.148037] landlock: Up and running.
[ 0.148039] Yama: becoming mindful.
[ 0.148077] AppArmor: AppArmor initialized
[ 0.148131] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.148152] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.148397] x86/cpu: SGX disabled by BIOS.
[ 0.148397] CPU0: Thermal monitoring enabled (TM1)
[ 0.148397] process: using mwait in idle threads
[ 0.148397] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.148397] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.148397] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.148397] Spectre V2 : Mitigation: Full generic retpoline
[ 0.148397] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.148397] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.148397] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.148397] Spectre V2 : User space: Mitigation: STIBP via prctl
[ 0.148397] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[ 0.148397] SRBDS: Mitigation: Microcode
[ 0.148397] MDS: Mitigation: Clear CPU buffers
[ 0.148397] Freeing SMP alternatives memory: 40K
[ 0.148397] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1934
[ 0.148397] smpboot: CPU0: Intel(R) Core(TM) i5-8250U CPU @ 1.60GHz (family: 0x6, model: 0x8e, stepping: 0xa)
[ 0.148397] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.148397] ... version: 4
[ 0.148397] ... bit width: 48
[ 0.148397] ... generic registers: 4
[ 0.148397] ... value mask: 0000ffffffffffff
[ 0.148397] ... max period: 00007fffffffffff
[ 0.148397] ... fixed-purpose events: 3
[ 0.148397] ... event mask: 000000070000000f
[ 0.148397] rcu: Hierarchical SRCU implementation.
[ 0.148397] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.148397] smp: Bringing up secondary CPUs ...
[ 0.148397] x86: Booting SMP configuration:
[ 0.148397] .... node #0, CPUs: #1 #2 #3 #4
[ 0.160430] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.160627] #5 #6 #7
[ 0.161307] smp: Brought up 1 node, 8 CPUs
[ 0.161307] smpboot: Max logical packages: 1
[ 0.161307] smpboot: Total of 8 processors activated (28800.00 BogoMIPS)
[ 0.164880] devtmpfs: initialized
[ 0.164880] x86/mm: Memory block size: 128MB
[ 0.165478] ACPI: PM: Registering ACPI NVS region [mem 0x73e05000-0x73e05fff] (4096 bytes)
[ 0.165478] ACPI: PM: Registering ACPI NVS region [mem 0x8c88e000-0x8cf7dfff] (7274496 bytes)
[ 0.165478] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.165478] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.165478] pinctrl core: initialized pinctrl subsystem
[ 0.165478] PM: RTC time: 19:01:48, date: 2022-03-27
[ 0.165478] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.165554] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.165662] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.165774] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.165786] audit: initializing netlink subsys (disabled)
[ 0.165798] audit: type=2000 audit(1648407708.020:1): state=initialized audit_enabled=0 res=1
[ 0.165798] thermal_sys: Registered thermal governor 'fair_share'
[ 0.165798] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.165798] thermal_sys: Registered thermal governor 'step_wise'
[ 0.165798] thermal_sys: Registered thermal governor 'user_space'
[ 0.165798] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.165798] EISA bus registered
[ 0.165798] cpuidle: using governor ladder
[ 0.165798] cpuidle: using governor menu
[ 0.165798] Simple Boot Flag at 0x44 set to 0x1
[ 0.165798] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.165798] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.165798] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.165798] PCI: Using configuration type 1 for base access
[ 0.168715] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.170524] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.170537] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.170537] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.170537] fbcon: Taking over console
[ 0.170537] ACPI: Added _OSI(Module Device)
[ 0.170537] ACPI: Added _OSI(Processor Device)
[ 0.170537] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.170537] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.170537] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.170537] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.170537] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.264579] ACPI: 14 ACPI AML tables successfully acquired and loaded
[ 0.267446] ACPI: EC: EC started
[ 0.267448] ACPI: EC: interrupt blocked

[ 30.304574] No Local Variables are initialized for Method [ECMD]

[ 30.304578] Initialized Arguments for Method [ECMD]: (1 arguments defined for method invocation)
[ 30.304579] Arg0: 0000000089a4427b <Obj> Integer 000000000000001A

[ 30.304590] ACPI Error: Aborting method \_SB.PCI0.LPCB.H_EC.ECMD due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/psparse-529)
[ 30.304606] ACPI Error: Aborting method \_TZ.FNCL due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/psparse-529)
[ 30.304618] ACPI Error: Aborting method \_TZ.FN00._OFF due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/psparse-529)
[ 30.304629] ACPI Error: Aborting method \_SB.PCI0.LPCB.H_EC._REG due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/psparse-529)
[ 30.304662] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 30.304664] ACPI: EC: Boot ECDT EC used to handle transactions
[ 30.307078] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 30.503197] ACPI: Dynamic OEM Table Load:
[ 30.503223] ACPI: SSDT 0xFFFF9B798128C000 00058B (v02 PmRef Cpu0Ist 00003000 INTL 20160527)
[ 30.506266] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[ 30.509667] ACPI: Dynamic OEM Table Load:
[ 30.509685] ACPI: SSDT 0xFFFF9B7981282C00 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160527)
[ 30.512612] ACPI: Dynamic OEM Table Load:
[ 30.512628] ACPI: SSDT 0xFFFF9B79802FC200 000115 (v02 PmRef Cpu0Hwp 00003000 INTL 20160527)
[ 30.515231] ACPI: Dynamic OEM Table Load:
[ 30.515246] ACPI: SSDT 0xFFFF9B79802FE400 0001A4 (v02 PmRef HwpLvt 00003000 INTL 20160527)
[ 30.518619] ACPI: Dynamic OEM Table Load:
[ 30.518639] ACPI: SSDT 0xFFFF9B798128D800 00065C (v02 PmRef ApIst 00003000 INTL 20160527)
[ 30.522171] ACPI: Dynamic OEM Table Load:
[ 30.522187] ACPI: SSDT 0xFFFF9B79802FFA00 000197 (v02 PmRef ApHwp 00003000 INTL 20160527)
[ 30.525054] ACPI: Dynamic OEM Table Load:
[ 30.525070] ACPI: SSDT 0xFFFF9B79802FC000 00018A (v02 PmRef ApCst 00003000 INTL 20160527)
[ 30.534385] ACPI: Interpreter enabled
[ 30.534475] ACPI: PM: (supports S0 S3 S4 S5)
[ 30.534478] ACPI: Using IOAPIC for interrupt routing
[ 30.534554] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 30.536959] ACPI: Enabled 8 GPEs in block 00 to 7F
[ 30.557477] ACPI: PM: Power Resource [PC01]
[ 30.558927] ACPI: PM: Power Resource [WRST]
[ 30.559671] ACPI: PM: Power Resource [WRST]
[ 30.560420] ACPI: PM: Power Resource [WRST]
[ 30.561165] ACPI: PM: Power Resource [WRST]
[ 30.561909] ACPI: PM: Power Resource [WRST]
[ 30.562643] ACPI: PM: Power Resource [WRST]
[ 30.563369] ACPI: PM: Power Resource [WRST]
[ 30.564106] ACPI: PM: Power Resource [WRST]
[ 30.564842] ACPI: PM: Power Resource [WRST]
[ 30.565578] ACPI: PM: Power Resource [WRST]
[ 30.566306] ACPI: PM: Power Resource [WRST]
[ 30.567008] ACPI: PM: Power Resource [WRST]
[ 30.567725] ACPI: PM: Power Resource [WRST]
[ 30.568432] ACPI: PM: Power Resource [WRST]
[ 30.569149] ACPI: PM: Power Resource [WRST]
[ 30.569854] ACPI: PM: Power Resource [WRST]
[ 30.570556] ACPI: PM: Power Resource [WRST]
[ 30.571263] ACPI: PM: Power Resource [WRST]
[ 30.571976] ACPI: PM: Power Resource [WRST]
[ 30.586533] acpi ABCD0000:00: ACPI dock station (docks/bays count: 1)
[ 30.591808] ACPI: PM: Power Resource [FN00]
[ 30.591970] ACPI: PM: Power Resource [FN01]
[ 30.592126] ACPI: PM: Power Resource [FN02]
[ 30.592280] ACPI: PM: Power Resource [FN03]
[ 30.592456] ACPI: PM: Power Resource [FN04]
[ 30.594825] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 30.594836] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 30.599731] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME PCIeCapability LTR]
[ 30.603816] PCI host bridge to bus 0000:00
[ 30.603820] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 30.603824] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 30.603828] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000fffff window]
[ 30.603833] pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window]
[ 30.603835] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 30.603838] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 30.603988] pci 0000:00:00.0: [8086:5914] type 00 class 0x060000
[ 30.604115] pci 0000:00:02.0: [8086:5917] type 00 class 0x030000
[ 30.604130] pci 0000:00:02.0: reg 0x10: [mem 0xb2000000-0xb2ffffff 64bit]
[ 30.604141] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 30.604148] pci 0000:00:02.0: reg 0x20: [io 0x6000-0x603f]
[ 30.604175] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 30.604180] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 30.604530] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
[ 30.604555] pci 0000:00:14.0: reg 0x10: [mem 0xb4210000-0xb421ffff 64bit]
[ 30.604646] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 30.605675] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
[ 30.605701] pci 0000:00:14.2: reg 0x10: [mem 0xb422a000-0xb422afff 64bit]
[ 30.606001] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000
[ 30.606210] pci 0000:00:15.0: reg 0x10: [mem 0xb422b000-0xb422bfff 64bit]
[ 30.607474] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
[ 30.607503] pci 0000:00:16.0: reg 0x10: [mem 0xb422c000-0xb422cfff 64bit]
[ 30.607599] pci 0000:00:16.0: PME# supported from D3hot
[ 30.608400] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601
[ 30.608420] pci 0000:00:17.0: reg 0x10: [mem 0xb4228000-0xb4229fff]
[ 30.608431] pci 0000:00:17.0: reg 0x14: [mem 0xb422f000-0xb422f0ff]
[ 30.608442] pci 0000:00:17.0: reg 0x18: [io 0x6080-0x6087]
[ 30.608453] pci 0000:00:17.0: reg 0x1c: [io 0x6088-0x608b]
[ 30.608463] pci 0000:00:17.0: reg 0x20: [io 0x6060-0x607f]
[ 30.608474] pci 0000:00:17.0: reg 0x24: [mem 0xb422d000-0xb422d7ff]
[ 30.608532] pci 0000:00:17.0: PME# supported from D3hot
[ 30.609005] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400
[ 30.609110] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 30.610113] pci 0000:00:1c.4: [8086:9d14] type 01 class 0x060400
[ 30.610220] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 30.611169] pci 0000:00:1c.5: [8086:9d15] type 01 class 0x060400
[ 30.611275] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 30.612236] pci 0000:00:1f.0: [8086:9d4e] type 00 class 0x060100
[ 30.612780] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
[ 30.612801] pci 0000:00:1f.2: reg 0x10: [mem 0xb4224000-0xb4227fff]
[ 30.613265] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040300
[ 30.613291] pci 0000:00:1f.3: reg 0x10: [mem 0xb4220000-0xb4223fff 64bit]
[ 30.613326] pci 0000:00:1f.3: reg 0x20: [mem 0xb4200000-0xb420ffff 64bit]
[ 30.613383] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 30.614759] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
[ 30.614820] pci 0000:00:1f.4: reg 0x10: [mem 0xb422e000-0xb422e0ff 64bit]
[ 30.614892] pci 0000:00:1f.4: reg 0x20: [io 0x6040-0x605f]
[ 30.615450] pci 0000:01:00.0: [10de:134d] type 00 class 0x030200
[ 30.615471] pci 0000:01:00.0: reg 0x10: [mem 0xb3000000-0xb3ffffff]
[ 30.615488] pci 0000:01:00.0: reg 0x14: [mem 0xa0000000-0xafffffff 64bit pref]
[ 30.615505] pci 0000:01:00.0: reg 0x1c: [mem 0xb0000000-0xb1ffffff 64bit pref]
[ 30.615517] pci 0000:01:00.0: reg 0x24: [io 0x5000-0x507f]
[ 30.615528] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[ 30.615559] pci 0000:01:00.0: Enabling HDA controller
[ 30.616092] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 30.616098] pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff]
[ 30.616102] pci 0000:00:1c.0: bridge window [mem 0xb3000000-0xb3ffffff]
[ 30.616108] pci 0000:00:1c.0: bridge window [mem 0xa0000000-0xb1ffffff 64bit pref]
[ 30.616202] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 30.616228] pci 0000:02:00.0: reg 0x10: [io 0x4000-0x40ff]
[ 30.616260] pci 0000:02:00.0: reg 0x18: [mem 0xb4104000-0xb4104fff 64bit]
[ 30.616281] pci 0000:02:00.0: reg 0x20: [mem 0xb4100000-0xb4103fff 64bit]
[ 30.616415] pci 0000:02:00.0: supports D1 D2
[ 30.616417] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 30.616633] pci 0000:00:1c.4: PCI bridge to [bus 02]
[ 30.616638] pci 0000:00:1c.4: bridge window [io 0x4000-0x4fff]
[ 30.616643] pci 0000:00:1c.4: bridge window [mem 0xb4100000-0xb41fffff]
[ 30.616754] pci 0000:03:00.0: [10ec:b723] type 00 class 0x028000
[ 30.616790] pci 0000:03:00.0: reg 0x10: [io 0x3000-0x30ff]
[ 30.616838] pci 0000:03:00.0: reg 0x18: [mem 0xb4000000-0xb4003fff 64bit]
[ 30.617048] pci 0000:03:00.0: supports D1 D2
[ 30.617049] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 30.617322] pci 0000:00:1c.5: PCI bridge to [bus 03]
[ 30.617327] pci 0000:00:1c.5: bridge window [io 0x3000-0x3fff]
[ 30.617331] pci 0000:00:1c.5: bridge window [mem 0xb4000000-0xb40fffff]
[ 30.622079] ACPI: PCI: Interrupt link LNKA configured for IRQ 11
[ 30.622195] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[ 30.622307] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[ 30.622418] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[ 30.622529] ACPI: PCI: Interrupt link LNKE configured for IRQ 11
[ 30.622640] ACPI: PCI: Interrupt link LNKF configured for IRQ 11
[ 30.622750] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[ 30.622860] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[ 30.635867] ACPI Warning: GPE type mismatch (level/edge) (20210930/evxface-791)
[ 30.635894] ACPI: EC: interrupt unblocked
[ 30.635896] ACPI: EC: event unblocked
[ 30.635909] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 30.635911] ACPI: EC: GPE=0x50
[ 30.635913] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot ECDT EC initialization complete
[ 30.635917] ACPI: \_SB_.PCI0.LPCB.EC0_: EC: Used to handle transactions and events
[ 30.636019] iommu: Default domain type: Translated
[ 30.636019] iommu: DMA domain TLB invalidation policy: lazy mode
[ 30.636019] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 30.636019] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 30.636019] pci 0000:00:02.0: vgaarb: bridge control possible
[ 30.636019] vgaarb: loaded
[ 30.636019] SCSI subsystem initialized
[ 30.636416] libata version 3.00 loaded.
[ 30.636446] ACPI: bus type USB registered
[ 30.636466] usbcore: registered new interface driver usbfs
[ 30.636475] usbcore: registered new interface driver hub
[ 30.636485] usbcore: registered new device driver usb
[ 30.636519] pps_core: LinuxPPS API ver. 1 registered
[ 30.636521] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 30.636525] PTP clock support registered
[ 30.636544] EDAC MC: Ver: 3.0.0
[ 30.636544] Registered efivars operations
[ 30.636634] NetLabel: Initializing
[ 30.636636] NetLabel: domain hash size = 128
[ 30.636638] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 30.636661] NetLabel: unlabeled traffic allowed by default
[ 30.636682] PCI: Using ACPI for IRQ routing
[ 30.665730] PCI: pci_cache_line_size set to 64 bytes
[ 30.665818] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 30.665822] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 30.665823] e820: reserve RAM buffer [mem 0x73bb0018-0x73ffffff]
[ 30.665826] e820: reserve RAM buffer [mem 0x73bba018-0x73ffffff]
[ 30.665828] e820: reserve RAM buffer [mem 0x73e05000-0x73ffffff]
[ 30.665830] e820: reserve RAM buffer [mem 0x75387000-0x77ffffff]
[ 30.665831] e820: reserve RAM buffer [mem 0x7b902000-0x7bffffff]
[ 30.665833] e820: reserve RAM buffer [mem 0x8be9e000-0x8bffffff]
[ 30.665835] e820: reserve RAM buffer [mem 0x8cfff000-0x8fffffff]
[ 30.665837] e820: reserve RAM buffer [mem 0x26f000000-0x26fffffff]
[ 30.665845] clocksource: Switched to clocksource tsc-early
[ 30.679918] VFS: Disk quotas dquot_6.6.0
[ 30.679949] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 30.680194] AppArmor: AppArmor Filesystem Enabled
[ 30.680283] pnp: PnP ACPI init
[ 30.680754] system 00:00: [mem 0xfd000000-0xfdabffff] has been reserved
[ 30.680763] system 00:00: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 30.680769] system 00:00: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 30.680774] system 00:00: [mem 0xfe000000-0xfe01ffff] has been reserved
[ 30.680779] system 00:00: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 30.680784] system 00:00: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 30.680789] system 00:00: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 30.681600] system 00:01: [io 0x2000-0x20fe] has been reserved
[ 30.681997] system 00:02: [io 0x0680-0x069f] has been reserved
[ 30.682003] system 00:02: [io 0xffff] has been reserved
[ 30.682008] system 00:02: [io 0xffff] has been reserved
[ 30.682012] system 00:02: [io 0xffff] has been reserved
[ 30.682017] system 00:02: [io 0x1800-0x18fe] has been reserved
[ 30.682021] system 00:02: [io 0x164e-0x164f] has been reserved
[ 30.682375] system 00:04: [io 0x1854-0x1857] has been reserved
[ 30.682924] system 00:07: [io 0x0240-0x0259] has been reserved
[ 30.688567] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[ 30.688574] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[ 30.688579] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[ 30.688583] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
[ 30.688588] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 30.688593] system 00:09: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 30.688598] system 00:09: [mem 0xfed45000-0xfed8ffff] could not be reserved
[ 30.688603] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[ 30.688607] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 30.688612] system 00:09: [mem 0x90000000-0x9001ffff] has been reserved
[ 30.690235] pnp: PnP ACPI: found 10 devices
[ 30.696606] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 30.696712] NET: Registered PF_INET protocol family
[ 30.696870] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 30.698637] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 30.698718] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 30.698913] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 30.699051] TCP: Hash tables configured (established 65536 bind 65536)
[ 30.699146] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)
[ 30.699200] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 30.699237] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 30.699310] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 30.699318] NET: Registered PF_XDP protocol family
[ 30.699324] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[ 30.699341] pci 0000:01:00.0: BAR 6: no space for [mem size 0x00080000 pref]
[ 30.699345] pci 0000:01:00.0: BAR 6: failed to assign [mem size 0x00080000 pref]
[ 30.699348] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 30.699352] pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff]
[ 30.699358] pci 0000:00:1c.0: bridge window [mem 0xb3000000-0xb3ffffff]
[ 30.699363] pci 0000:00:1c.0: bridge window [mem 0xa0000000-0xb1ffffff 64bit pref]
[ 30.699370] pci 0000:00:1c.4: PCI bridge to [bus 02]
[ 30.699373] pci 0000:00:1c.4: bridge window [io 0x4000-0x4fff]
[ 30.699378] pci 0000:00:1c.4: bridge window [mem 0xb4100000-0xb41fffff]
[ 30.699387] pci 0000:00:1c.5: PCI bridge to [bus 03]
[ 30.699390] pci 0000:00:1c.5: bridge window [io 0x3000-0x3fff]
[ 30.699395] pci 0000:00:1c.5: bridge window [mem 0xb4000000-0xb40fffff]
[ 30.699404] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 30.699407] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 30.699409] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000fffff window]
[ 30.699412] pci_bus 0000:00: resource 7 [mem 0x90000000-0xdfffffff window]
[ 30.699414] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[ 30.699417] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
[ 30.699419] pci_bus 0000:01: resource 1 [mem 0xb3000000-0xb3ffffff]
[ 30.699421] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xb1ffffff 64bit pref]
[ 30.699424] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
[ 30.699426] pci_bus 0000:02: resource 1 [mem 0xb4100000-0xb41fffff]
[ 30.699429] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 30.699431] pci_bus 0000:03: resource 1 [mem 0xb4000000-0xb40fffff]
[ 30.701601] PCI: CLS 64 bytes, default 64
[ 30.701639] DMAR: ACPI device "device:72" under DMAR at fed91000 as 00:15.0
[ 30.701673] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 30.701675] software IO TLB: mapped [mem 0x00000000878ec000-0x000000008b8ec000] (64MB)
[ 30.701690] Trying to unpack rootfs image as initramfs...
[ 30.702994] Initialise system trusted keyrings
[ 30.703022] Key type blacklist registered
[ 30.703092] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[ 30.706439] zbud: loaded
[ 30.707067] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 30.707390] fuse: init (API version 7.35)
[ 30.707715] integrity: Platform Keyring initialized
[ 30.722434] Key type asymmetric registered
[ 30.722439] Asymmetric key parser 'x509' registered
[ 30.722512] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[ 30.722581] io scheduler mq-deadline registered
[ 30.723385] pcieport 0000:00:1c.0: PME: Signaling with IRQ 122
[ 30.723722] pcieport 0000:00:1c.4: PME: Signaling with IRQ 123
[ 30.724052] pcieport 0000:00:1c.5: PME: Signaling with IRQ 124
[ 30.724178] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 30.725420] ACPI: AC: AC Adapter [AC0] (on-line)
[ 30.725527] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[ 30.725555] ACPI: button: Sleep Button [SLPB]
[ 30.725598] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:01/input/input1
[ 30.725619] ACPI: button: Lid Switch [LID]
[ 30.725663] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 30.725708] ACPI: button: Power Button [PWRF]
[ 30.726100] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1934
[ 30.743098] ACPI: thermal: Critical threshold 200 C
[ 30.744249] thermal LNXTHERM:00: registered as thermal_zone0
[ 30.744254] ACPI: thermal: Thermal Zone [THRM] (49 C)
[ 30.745304] ACPI: thermal: Critical threshold 200 C
[ 31.724431] tsc: Refined TSC clocksource calibration: 1799.999 MHz
[ 31.724447] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19f228ab7a2, max_idle_ns: 440795289252 ns
[ 31.725077] clocksource: Switched to clocksource tsc
[ 32.373102] Freeing initrd memory: 71608K

[ 60.760672] No Local Variables are initialized for Method [ECMD]

[ 60.760675] Initialized Arguments for Method [ECMD]: (1 arguments defined for method invocation)
[ 60.760677] Arg0: 00000000fa7d1ba1 <Obj> Integer 000000000000001A

[ 60.760689] ACPI Error: Aborting method \_SB.PCI0.LPCB.H_EC.ECMD due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/psparse-529)
[ 60.760708] ACPI Error: Aborting method \_TZ.FNCL due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/psparse-529)
[ 60.760722] ACPI Error: Aborting method \_TZ.FN00._ON due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/psparse-529)
[ 60.760738] acpi PNP0C0B:00: Failed to change power state to D0

[ 90.776982] No Local Variables are initialized for Method [ECMD]

[ 90.776985] Initialized Arguments for Method [ECMD]: (1 arguments defined for method invocation)
[ 90.776987] Arg0: 000000009a229920 <Obj> Integer 000000000000001A

[ 90.777000] ACPI Error: Aborting method \_SB.PCI0.LPCB.H_EC.ECMD due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/psparse-529)
[ 90.777019] ACPI Error: Aborting method \_TZ.FNCL due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/psparse-529)
[ 90.777035] ACPI Error: Aborting method \_TZ.FN01._ON due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/psparse-529)
[ 90.777052] acpi PNP0C0B:01: Failed to change power state to D0

[ 120.793264] No Local Variables are initialized for Method [ECMD]

[ 120.793267] Initialized Arguments for Method [ECMD]: (1 arguments defined for method invocation)
[ 120.793269] Arg0: 00000000be9b36ef <Obj> Integer 000000000000001A

[ 120.793281] ACPI Error: Aborting method \_SB.PCI0.LPCB.H_EC.ECMD due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/psparse-529)
[ 120.793299] ACPI Error: Aborting method \_TZ.FNCL due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/psparse-529)
[ 120.793314] ACPI Error: Aborting method \_TZ.FN02._ON due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/psparse-529)
[ 120.793329] acpi PNP0C0B:02: Failed to change power state to D0

[ 150.809398] No Local Variables are initialized for Method [ECMD]

[ 150.809402] Initialized Arguments for Method [ECMD]: (1 arguments defined for method invocation)
[ 150.809404] Arg0: 00000000e9388cc4 <Obj> Integer 000000000000001A

[ 150.809416] ACPI Error: Aborting method \_SB.PCI0.LPCB.H_EC.ECMD due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/psparse-529)
[ 150.809435] ACPI Error: Aborting method \_TZ.FNCL due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/psparse-529)
[ 150.809449] ACPI Error: Aborting method \_TZ.FN03._ON due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/psparse-529)
[ 150.809465] acpi PNP0C0B:03: Failed to change power state to D0

[ 180.824987] No Local Variables are initialized for Method [ECMD]

[ 180.824990] Initialized Arguments for Method [ECMD]: (1 arguments defined for method invocation)
[ 180.824992] Arg0: 00000000a02a1e5f <Obj> Integer 000000000000001A

[ 180.825004] ACPI Error: Aborting method \_SB.PCI0.LPCB.H_EC.ECMD due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/psparse-529)
[ 180.825022] ACPI Error: Aborting method \_TZ.FNCL due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/psparse-529)
[ 180.825036] ACPI Error: Aborting method \_TZ.FN04._ON due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/psparse-529)
[ 180.825052] acpi PNP0C0B:04: Failed to change power state to D0
[ 180.825072] thermal LNXTHERM:01: registered as thermal_zone1
[ 180.825075] ACPI: thermal: Thermal Zone [TZ00] (128 C)
[ 180.826440] ACPI: thermal: Critical threshold 200 C
[ 180.830302] thermal LNXTHERM:02: registered as thermal_zone2
[ 180.830308] ACPI: thermal: Thermal Zone [TZ01] (0 C)
[ 180.830767] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 180.833729] hpet_acpi_add: no address or irqs in _CRS
[ 180.833810] Linux agpgart interface v0.103
[ 180.842742] ACPI: battery: Slot [BAT0] (battery present)
[ 180.850753] loop: module loaded
[ 180.851161] tun: Universal TUN/TAP device driver, 1.6
[ 180.851251] PPP generic driver version 2.4.2
[ 180.851377] VFIO - User Level meta-driver version: 0.3
[ 180.851527] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 180.851532] ehci-pci: EHCI PCI platform driver
[ 180.851543] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 180.851546] ohci-pci: OHCI PCI platform driver
[ 180.851557] uhci_hcd: USB Universal Host Controller Interface driver
[ 180.851617] i8042: PNP: PS/2 Controller [PNP0303S2K,PNP0f03S2M] at 0x60,0x64 irq 1,12
[ 180.855238] i8042: Detected active multiplexing controller, rev 1.1
[ 180.857431] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 180.857439] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 180.857478] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 180.857504] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 180.857528] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 180.857744] mousedev: PS/2 mouse device common for all mice
[ 180.858148] rtc_cmos 00:03: RTC can wake from S4
[ 180.858860] rtc_cmos 00:03: registered as rtc0
[ 180.859003] rtc_cmos 00:03: setting system clock to 2022-03-27T19:04:49 UTC (1648407889)
[ 180.859026] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram
[ 180.859037] i2c_dev: i2c /dev entries driver
[ 180.859461] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
[ 180.859495] device-mapper: uevent: version 1.0.3
[ 180.859615] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: [email protected]
[ 180.859642] platform eisa.0: Probing EISA bus 0
[ 180.859645] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 180.859647] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 180.859649] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 180.859651] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 180.859653] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 180.859655] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 180.859656] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 180.859658] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 180.859660] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 180.859662] platform eisa.0: EISA: Detected 0 cards
[ 180.859666] intel_pstate: Intel P-state driver initializing
[ 180.860753] intel_pstate: HWP enabled
[ 180.860835] ledtrig-cpu: registered to indicate activity on CPUs
[ 180.860869] efifb: probing for efifb
[ 180.860908] efifb: showing boot graphics
[ 180.862226] efifb: framebuffer at 0xc0000000, using 4128k, total 4128k
[ 180.862229] efifb: mode is 1366x768x32, linelength=5504, pages=1
[ 180.862231] efifb: scrolling: redraw
[ 180.862232] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 180.862358] Console: switching to colour frame buffer device 170x48
[ 180.866205] fb0: EFI VGA frame buffer device
[ 180.866234] EFI Variables Facility v0.08 2004-May-17
[ 180.869522] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 180.897117] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[ 180.897125] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[ 180.941377] intel_pmc_core INT33A1:00: initialized
[ 180.941452] drop_monitor: Initializing network drop monitor service
[ 180.941568] NET: Registered PF_INET6 protocol family
[ 180.946967] Segment Routing with IPv6
[ 180.946973] In-situ OAM (IOAM) with IPv6
[ 180.946989] NET: Registered PF_PACKET protocol family
[ 180.947020] Key type dns_resolver registered
[ 180.947672] microcode: sig=0x806ea, pf=0x80, revision=0xea
[ 180.947892] microcode: Microcode Update Driver: v2.2.
[ 180.947896] IPI shorthand broadcast: enabled
[ 180.947904] sched_clock: Marking stable (180940855426, 7035020)->(181016608514, -68718068)
[ 180.948160] registered taskstats version 1
[ 180.948316] Loading compiled-in X.509 certificates
[ 180.948992] Loaded X.509 cert 'Build time autogenerated kernel key: 97b45532b0794b2c57d7a49efc52a19b558864fb'
[ 180.949429] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
[ 180.949865] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
[ 180.949866] blacklist: Loading compiled-in revocation X.509 certificates
[ 180.949881] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0'
[ 180.950066] zswap: loaded using pool lzo/zbud
[ 180.950449] Key type ._fscrypt registered
[ 180.950450] Key type .fscrypt registered
[ 180.950451] Key type fscrypt-provisioning registered
[ 180.950633] Key type trusted registered
[ 180.953083] Key type encrypted registered
[ 180.953086] AppArmor: AppArmor sha1 policy hashing enabled
[ 180.954738] integrity: Loading X.509 certificate: UEFI:db
[ 180.954780] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[ 180.954781] integrity: Loading X.509 certificate: UEFI:db
[ 180.954801] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[ 180.954802] integrity: Loading X.509 certificate: UEFI:db
[ 180.955296] integrity: Loaded X.509 cert ': cfb8571369f6ceac4adc2ae26952fd00'
[ 180.957723] Loading compiled-in module X.509 certificates
[ 180.958200] Loaded X.509 cert 'Build time autogenerated kernel key: 97b45532b0794b2c57d7a49efc52a19b558864fb'
[ 180.958202] ima: Allocated hash algorithm: sha1
[ 180.996523] ima: No architecture policies found
[ 180.996554] evm: Initialising EVM extended attributes:
[ 180.996556] evm: security.selinux
[ 180.996559] evm: security.SMACK64
[ 180.996560] evm: security.SMACK64EXEC
[ 180.996562] evm: security.SMACK64TRANSMUTE
[ 180.996564] evm: security.SMACK64MMAP
[ 180.996566] evm: security.apparmor
[ 180.996567] evm: security.ima
[ 180.996569] evm: security.capability
[ 180.996571] evm: HMAC attrs: 0x1
[ 181.001587] PM: Magic number: 14:986:41
[ 181.001611] bdi 7:6: hash matches
[ 181.001730] memory memory77: hash matches
[ 181.002027] RAS: Correctable Errors collector initialized.
[ 181.004955] Freeing unused decrypted memory: 2036K
[ 181.006026] Freeing unused kernel image (initmem) memory: 2752K
[ 181.052707] Write protecting the kernel read-only data: 30720k
[ 181.054180] Freeing unused kernel image (text/rodata gap) memory: 2036K
[ 181.055030] Freeing unused kernel image (rodata/data gap) memory: 1476K
[ 181.134949] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 181.134951] x86/mm: Checking user space page tables
[ 181.140310] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[ 181.140313] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[ 181.181043] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 181.181048] Run /init as init process
[ 181.181049] with arguments:
[ 181.181050] /init
[ 181.181051] splash
[ 181.181051] with environment:
[ 181.181052] HOME=/
[ 181.181052] TERM=linux
[ 181.263670] wmi_bus wmi_bus-PNP0C14:00: WQ data block query control method not found
[ 181.263675] wmi_bus wmi_bus-PNP0C14:00: WQ data block query control method not found
[ 181.263677] wmi_bus wmi_bus-PNP0C14:00: WQ data block query control method not found
[ 181.263679] wmi_bus wmi_bus-PNP0C14:00: WQ data block query control method not found
[ 181.266512] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 181.266995] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 181.268050] ahci 0000:00:17.0: version 3.0
[ 181.268074] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081109810
[ 181.268423] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 3 ports 6 Gbps 0x7 impl SATA mode
[ 181.268428] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
[ 181.268576] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[ 181.268623] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.16
[ 181.268627] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 181.268629] usb usb1: Product: xHCI Host Controller
[ 181.268631] usb usb1: Manufacturer: Linux 5.16.11-76051611-generic xhci-hcd
[ 181.268633] usb usb1: SerialNumber: 0000:00:14.0
[ 181.270168] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ 181.271016] hub 1-0:1.0: USB hub found
[ 181.271140] hub 1-0:1.0: 12 ports detected
[ 181.273230] scsi host0: ahci
[ 181.274740] ACPI: bus type drm_connector registered
[ 181.276520] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ 181.276560] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 181.276707] scsi host1: ahci
[ 181.279469] scsi host2: ahci
[ 181.279535] ata1: SATA max UDMA/133 abar m2048@0xb422d000 port 0xb422d100 irq 125
[ 181.279539] ata2: SATA max UDMA/133 abar m2048@0xb422d000 port 0xb422d180 irq 125
[ 181.279541] ata3: SATA max UDMA/133 abar m2048@0xb422d000 port 0xb422d200 irq 125
[ 181.282570] cryptd: max_cpu_qlen set to 1000
[ 181.285038] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 181.285042] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 181.285046] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 181.285090] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.16
[ 181.285093] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 181.285095] usb usb2: Product: xHCI Host Controller
[ 181.285097] usb usb2: Manufacturer: Linux 5.16.11-76051611-generic xhci-hcd
[ 181.285099] usb usb2: SerialNumber: 0000:00:14.0
[ 181.285198] hub 2-0:1.0: USB hub found
[ 181.285212] hub 2-0:1.0: 6 ports detected
[ 181.286636] usb: port power management may be unreliable
[ 181.287597] AVX2 version of gcm_enc/dec engaged.
[ 181.287640] AES CTR mode by8 optimization enabled
[ 181.297486] i2c i2c-1: 1/2 memory slots populated (from DMI)
[ 181.297889] i2c i2c-1: Successfully instantiated SPD at 0x50
[ 181.298291] r8169 0000:02:00.0 eth0: RTL8168h/8111h, d4:5d:df:03:6e:87, XID 541, IRQ 127
[ 181.298294] r8169 0000:02:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[ 181.341916] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[ 181.341929] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[ 181.540513] usb 1-1: new low-speed USB device number 2 using xhci_hcd
[ 181.545913] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[ 181.545927] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[ 181.596106] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 181.596151] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 181.596192] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 181.596680] ata1.00: ATA-10: WDC WD10SPZX-22Z10T0, 01.01A01, max UDMA/133
[ 181.596937] ata3.00: ATA-10: WDC WDS480G2G0B-00EPW0, UK220400, max UDMA/133
[ 181.596952] ata3.00: 937703088 sectors, multi 1: LBA48 NCQ (depth 32)
[ 181.598049] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 181.598067] ata1.00: Features: NCQ-prio
[ 181.598123] ata2.00: ATAPI: HL-DT-ST DVDRAM GUE0N, 1.00, max UDMA/133
[ 181.598604] ata3.00: Features: Dev-Sleep
[ 181.600050] ata1.00: configured for UDMA/133
[ 181.600315] ata2.00: configured for UDMA/133
[ 181.600689] scsi 0:0:0:0: Direct-Access ATA WDC WD10SPZX-22Z 1A01 PQ: 0 ANSI: 5
[ 181.601527] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 181.601939] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 181.601952] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 181.602016] sd 0:0:0:0: [sda] Write Protect is off
[ 181.602025] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 181.602116] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 181.602931] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GUE0N 1.00 PQ: 0 ANSI: 5
[ 181.605006] ata3.00: configured for UDMA/133
[ 181.615131] ahci 0000:00:17.0: port does not support device sleep
[ 181.690209] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 181.690220] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 181.692470] usb 1-1: New USB device found, idVendor=c0f4, idProduct=0bd0, bcdDevice= 1.10
[ 181.692481] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 181.692487] usb 1-1: Product: Usb KeyBoard
[ 181.692490] usb 1-1: Manufacturer: Usb KeyBoard
[ 181.721803] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 181.722095] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 181.722782] scsi 2:0:0:0: Direct-Access ATA WDC WDS480G2G0B- 0400 PQ: 0 ANSI: 5
[ 181.723603] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 181.723995] sd 2:0:0:0: [sdb] 937703088 512-byte logical blocks: (480 GB/447 GiB)
[ 181.724045] sd 2:0:0:0: [sdb] Write Protect is off
[ 181.724055] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 181.724122] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 181.759332] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[ 181.759345] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[ 181.766969] sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7 sdb8
[ 181.792800] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 181.820500] usb 1-2: new low-speed USB device number 3 using xhci_hcd
[ 181.961929] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[ 181.961943] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[ 181.971422] usb 1-2: New USB device found, idVendor=1bcf, idProduct=08a0, bcdDevice= 1.04
[ 181.971437] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 182.030833] sda: sda1 sda2 sda3 sda4
[ 182.064734] sd 0:0:0:0: [sda] Attached SCSI disk
[ 182.070371] r8169 0000:02:00.0 enp2s0: renamed from eth0
[ 182.104408] usb 1-5: new high-speed USB device number 4 using xhci_hcd
[ 182.132258] checking generic (c0000000 408000) vs hw (b2000000 1000000)
[ 182.132261] checking generic (c0000000 408000) vs hw (c0000000 10000000)
[ 182.132262] fb0: switching to i915 from EFI VGA
[ 182.132328] Console: switching to colour dummy device 80x25
[ 182.132354] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 182.134367] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+memwns=io+mem
[ 182.134734] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[ 182.177293] i915 0000:00:02.0: [drm] [ENCODER:102DI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it
[ 182.177317] i915 0000:00:02.0: [drm] [ENCODER:111DI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it
[ 182.204115] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
[ 182.212082] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 182.213453] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12
[ 182.213945] ACPI: video: [Firmware Bug]: ACPI(PXSX) defines _DOD but not _DOS
[ 182.213988] ACPI: video: Video Device [PXSX] (multi-head: yes rom: yes post: no)
[ 182.214132] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:36/LNXVIDEO:01/input/input13
[ 182.220035] fbcon: i915drmfb (fb0) is primary device
[ 182.234874] Console: switching to colour frame buffer device 170x48
[ 182.252774] usb 1-5: New USB device found, idVendor=0bda, idProduct=0129, bcdDevice=39.60
[ 182.252783] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 182.252788] usb 1-5: Product: USB2.0-CRW
[ 182.252792] usb 1-5: Manufacturer: Generic
[ 182.252795] usb 1-5: SerialNumber: 20100201396000000
[ 182.258555] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[ 182.380478] usb 1-7: new full-speed USB device number 5 using xhci_hcd
[ 182.530413] usb 1-7: New USB device found, idVendor=13d3, idProduct=3416, bcdDevice= 2.00
[ 182.530425] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 182.530430] usb 1-7: Product: Bluetooth Radio
[ 182.530433] usb 1-7: Manufacturer: Realtek
[ 182.530437] usb 1-7: SerialNumber: 00e04c000001
[ 182.656491] usb 1-10: new high-speed USB device number 6 using xhci_hcd
[ 182.851278] usb 1-10: New USB device found, idVendor=04f2, idProduct=b5c6, bcdDevice=10.32
[ 182.851293] usb 1-10: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 182.851299] usb 1-10: Product: USB2.0 HD UVC WebCam
[ 182.851303] usb 1-10: Manufacturer: Chicony Electronics Co.,Ltd.
[ 182.851307] usb 1-10: SerialNumber: 200901010001
[ 182.869658] hid: raw HID events driver (C) Jiri Kosina
[ 182.869992] usbcore: registered new interface driver rtsx_usb
[ 182.880612] usbcore: registered new interface driver usbhid
[ 182.880614] usbhid: USB HID core driver
[ 182.882643] input: Usb KeyBoard Usb KeyBoard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:C0F4:0BD0.0001/input/input14
[ 182.940942] hid-generic 0003:C0F4:0BD0.0001: input,hidraw0: USB HID v1.10 Keyboard [Usb KeyBoard Usb KeyBoard] on usb-0000:00:14.0-1/input0
[ 182.941508] input: Usb KeyBoard Usb KeyBoard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:C0F4:0BD0.0002/input/input15
[ 182.954663] psmouse serio4: synaptics: queried max coordinates: x [..5660], y [..4696]
[ 182.988694] psmouse serio4: synaptics: queried min coordinates: x [1366..], y [1268..]
[ 182.988723] psmouse serio4: synaptics: Your touchpad (PNP: SYN1d29 PNP0f03) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to [email protected].
[ 183.001080] input: Usb KeyBoard Usb KeyBoard System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:C0F4:0BD0.0002/input/input16
[ 183.001537] hid-generic 0003:C0F4:0BD0.0002: input,hidraw1: USB HID v1.10 Device [Usb KeyBoard Usb KeyBoard] on usb-0000:00:14.0-1/input1
[ 183.002481] input: HID 1bcf:08a0 Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:1BCF:08A0.0003/input/input17
[ 183.003078] input: HID 1bcf:08a0 Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:1BCF:08A0.0003/input/input18
[ 183.056320] psmouse serio4: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xf00323/0x840300/0x12e800/0x0, board id: 2987, fw id: 1885195
[ 183.060949] input: HID 1bcf:08a0 as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:1BCF:08A0.0003/input/input19
[ 183.061595] hid-generic 0003:1BCF:08A0.0003: input,hiddev0,hidraw2: USB HID v1.10 Mouse [HID 1bcf:08a0] on usb-0000:00:14.0-2/input0
[ 183.099732] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input11
[ 183.181249] system76_acpi: loading out-of-tree module taints kernel.
[ 183.181290] system76_acpi: module verification failed: signature and/or required key missing - tainting kernel
[ 183.183361] system76: Model does not utilize this driver
[ 183.243691] usbcore: registered new interface driver system76-io
[ 183.336457] raid6: avx2x4 gen() 31646 MB/s
[ 183.404449] raid6: avx2x4 xor() 11145 MB/s
[ 183.472449] raid6: avx2x2 gen() 37326 MB/s
[ 183.540456] raid6: avx2x2 xor() 22088 MB/s
[ 183.608449] raid6: avx2x1 gen() 25761 MB/s
[ 183.676448] raid6: avx2x1 xor() 17484 MB/s
[ 183.744449] raid6: sse2x4 gen() 15494 MB/s
[ 183.812450] raid6: sse2x4 xor() 8851 MB/s
[ 183.880460] raid6: sse2x2 gen() 15677 MB/s
[ 183.948449] raid6: sse2x2 xor() 9719 MB/s
[ 184.016450] raid6: sse2x1 gen() 13282 MB/s
[ 184.084451] raid6: sse2x1 xor() 6579 MB/s
[ 184.084452] raid6: using algorithm avx2x2 gen() 37326 MB/s
[ 184.084453] raid6: .... xor() 22088 MB/s, rmw enabled
[ 184.084454] raid6: using avx2x2 recovery algorithm
[ 184.085272] xor: automatically using best checksumming function avx
[ 184.086071] async_tx: api initialized (async)
[ 185.139436] EXT4-fs (sdb8): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[ 185.540087] systemd[1]: Inserted module 'autofs4'
[ 185.720605] systemd[1]: Successfully credited entropy passed from boot loader.
[ 185.731619] systemd[1]: systemd 248.3-1ubuntu8.2pop0~1647542931~21.10~ab7b8e3 running in system mode. (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS -OPENSSL +ACL +BLKID +CURL +ELFUTILS -FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP -LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[ 185.748864] systemd[1]: Detected architecture x86-64.
[ 185.750166] systemd[1]: Hostname set to <casper>.
[ 186.377156] systemd[1]: /etc/systemd/system/teamviewerd.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/teamviewerd.pid → /run/teamviewerd.pid; please update the unit file accordingly.
[ 186.425776] systemd[1]: Queued start job for default target Graphical Interface.
[ 186.428638] systemd[1]: Created slice system-modprobe.slice.
[ 186.429134] systemd[1]: Created slice User and Session Slice.
[ 186.429281] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 186.429591] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 186.429708] systemd[1]: Reached target User and Group Name Lookups.
[ 186.429739] systemd[1]: Reached target Remote File Systems.
[ 186.429775] systemd[1]: Reached target Slices.
[ 186.429808] systemd[1]: Reached target Swap.
[ 186.429845] systemd[1]: Reached target Local Verity Integrity Protected Volumes.
[ 186.429994] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 186.430182] systemd[1]: Listening on LVM2 poll daemon socket.
[ 186.430355] systemd[1]: Listening on Syslog Socket.
[ 186.430472] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 186.430847] systemd[1]: Listening on Journal Audit Socket.
[ 186.431022] systemd[1]: Listening on Journal Socket (/dev/log).
[ 186.431238] systemd[1]: Listening on Journal Socket.
[ 186.431488] systemd[1]: Listening on udev Control Socket.
[ 186.431706] systemd[1]: Listening on udev Kernel Socket.
[ 186.433096] systemd[1]: Mounting Huge Pages File System...
[ 186.434273] systemd[1]: Mounting POSIX Message Queue File System...
[ 186.435336] systemd[1]: Mounting Kernel Debug File System...
[ 186.436479] systemd[1]: Mounting Kernel Trace File System...
[ 186.438927] systemd[1]: Starting Journal Service...
[ 186.439131] systemd[1]: Finished Availability of block devices.
[ 186.440196] systemd[1]: Starting Set the console keyboard layout...
[ 186.441218] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 186.442023] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 186.443025] systemd[1]: Starting Load Kernel Module configfs...
[ 186.443954] systemd[1]: Starting Load Kernel Module drm...
[ 186.444781] systemd[1]: Starting Load Kernel Module fuse...
[ 186.445899] systemd[1]: Started Nameserver information manager.
[ 186.446108] systemd[1]: Reached target Network (Pre).
[ 186.447946] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 186.450788] systemd[1]: Starting Load Kernel Modules...
[ 186.451681] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 186.452688] systemd[1]: Starting Coldplug All udev Devices...
[ 186.453477] systemd[1]: Starting Uncomplicated firewall...
[ 186.455838] systemd[1]: Mounted Huge Pages File System.
[ 186.456003] systemd[1]: Mounted POSIX Message Queue File System.
[ 186.456136] systemd[1]: Mounted Kernel Debug File System.
[ 186.456250] systemd[1]: Mounted Kernel Trace File System.
[ 186.456640] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 186.457003] systemd[1]: [email protected]: Deactivated successfully.
[ 186.457200] systemd[1]: Finished Load Kernel Module configfs.
[ 186.457388] systemd[1]: [email protected]: Deactivated successfully.
[ 186.457554] systemd[1]: Finished Load Kernel Module drm.
[ 186.457803] systemd[1]: [email protected]: Deactivated successfully.
[ 186.458113] systemd[1]: Finished Load Kernel Module fuse.
[ 186.459173] systemd[1]: Mounting FUSE Control File System...
[ 186.459900] systemd[1]: Mounting Kernel Configuration File System...
[ 186.461586] systemd[1]: Mounted FUSE Control File System.
[ 186.461682] systemd[1]: Mounted Kernel Configuration File System.
[ 186.472484] systemd[1]: Finished Uncomplicated firewall.
[ 186.476018] EXT4-fs (sdb8): re-mounted. Opts: errors=remount-ro. Quota mode: none.
[ 186.477072] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 186.485501] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 186.485535] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 186.486053] systemd[1]: Starting Load/Save Random Seed...
[ 186.486613] systemd[1]: Starting Create System Users...
[ 186.486728] systemd[1]: Started Journal Service.
[ 186.497339] systemd-journald[398]: Received client request to flush runtime journal.
[ 186.502219] lp: driver loaded but no devices found
[ 186.508684] ppdev: user-space parallel port driver
[ 186.513998] systemd-journald[398]: File /var/log/journal/d29a0fe47ff58a77c604fe7a623b8801/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 186.777169] acpi INT33D6:00: intel-vbtn: created platform device
[ 186.782650] input: Intel Virtual Buttons as /devices/platform/INT33D6:00/input/input20
[ 186.870811] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 186.874292] mc: Linux media interface: v0.10
[ 186.877420] ee1004 1-0050: 512 byte EE1004-compliant SPD EEPROM, read-only
[ 186.938399] pstore: Using crash dump compression: deflate
[ 186.938417] pstore: Registered efi as persistent store backend
[ 186.940237] videodev: Linux video capture interface: v2.00
[ 186.942236] Bluetooth: Core ver 2.22
[ 186.942256] NET: Registered PF_BLUETOOTH protocol family
[ 186.942257] Bluetooth: HCI device and connection manager initialized
[ 186.942261] Bluetooth: HCI socket layer initialized
[ 186.942262] Bluetooth: L2CAP socket layer initialized
[ 186.942265] Bluetooth: SCO socket layer initialized
[ 186.989379] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 186.989554] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 187.033518] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 187.033523] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 187.033524] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 187.033525] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 187.033526] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 187.083254] nvidia: module license 'NVIDIA' taints kernel.
[ 187.083258] Disabling lock debugging due to kernel taint
[ 187.090053] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
[ 187.125882] nvidia-nvlink: Nvlink Core is being initialized, major device number 510

[ 187.127933] nvidia 0000:01:00.0: enabling device (0406 -> 0407)
[ 187.132249] usbcore: registered new interface driver btusb
[ 187.138109] Bluetooth: hci0: RTL: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
[ 187.139420] Bluetooth: hci0: RTL: rom_version status=0 version=1
[ 187.139425] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_fw.bin
[ 187.149335] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_config.bin
[ 187.149363] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2
[ 187.149370] Bluetooth: hci0: RTL: cfg_sz -2, total sz 22496
[ 187.179188] usb 1-10: Found UVC 1.00 device USB2.0 HD UVC WebCam (04f2:b5c6)
[ 187.200802] input: USB2.0 HD UVC WebCam: USB2.0 HD as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/input/input22
[ 187.200867] usbcore: registered new interface driver uvcvideo
[ 187.243972] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 470.86 Tue Oct 26 21:55:45 UTC 2021
[ 187.293129] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 470.86 Tue Oct 26 21:46:51 UTC 2021
[ 187.327106] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[ 187.340579] rtl8723be: Using firmware rtlwifi/rtl8723befw_36.bin
[ 187.343897] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 187.344668] rtlwifi: rtlwifi: wireless switch is on
[ 187.348211] intel_tcc_cooling: Programmable TCC Offset detected
[ 187.356167] rtl8723be 0000:03:00.0 wlp3s0: renamed from wlan0
[ 187.363718] ACPI Warning: \_SB.PCI0.RP01.PXSX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20210930/nsarguments-61)
[ 187.364100] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 187.367516] intel_rapl_common: Found RAPL domain package
[ 187.367521] intel_rapl_common: Found RAPL domain core
[ 187.367523] intel_rapl_common: Found RAPL domain uncore
[ 187.367525] intel_rapl_common: Found RAPL domain dram
[ 187.377873] audit: type=1400 audit(1648407896.016:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=746 comm="apparmor_parser"
[ 187.377960] audit: type=1400 audit(1648407896.016:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=754 comm="apparmor_parser"
[ 187.378985] audit: type=1400 audit(1648407896.016:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=747 comm="apparmor_parser"
[ 187.378991] audit: type=1400 audit(1648407896.016:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=747 comm="apparmor_parser"
[ 187.380346] audit: type=1400 audit(1648407896.016:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oosplash" pid=753 comm="apparmor_parser"
[ 187.381165] audit: type=1400 audit(1648407896.020:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=751 comm="apparmor_parser"
[ 187.381170] audit: type=1400 audit(1648407896.020:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=751 comm="apparmor_parser"
[ 187.381173] audit: type=1400 audit(1648407896.020:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=751 comm="apparmor_parser"
[ 187.383951] audit: type=1400 audit(1648407896.020:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=759 comm="apparmor_parser"
[ 187.392640] audit: type=1400 audit(1648407896.032:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=760 comm="apparmor_parser"
[ 187.487046] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 187.487051] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 187.487052] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 187.487054] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 187.487055] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 187.487055] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 187.487056] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 187.517708] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
[ 187.546502] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input24
[ 187.556525] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input25
[ 187.556867] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input26
[ 187.557013] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input27
[ 187.557377] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input28
[ 187.560673] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input29
[ 187.658764] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 1
[ 187.712648] nvidia_uvm: module uses symbols from proprietary module nvidia, inheriting taint.
[ 187.715753] nvidia-uvm: Loaded the UVM driver, major device number 508.
[ 187.959157] Bluetooth: hci0: RTL: fw version 0x0e2f9f73
[ 188.091123] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 188.091128] Bluetooth: BNEP filters: protocol multicast
[ 188.091133] Bluetooth: BNEP socket layer initialized
[ 188.113982] NET: Registered PF_ALG protocol family
[ 188.360421] Generic FE-GE Realtek PHY r8169-0-200:00: attached PHY driver (mii_bushy_addr=r8169-0-200:00, irq=MAC)
[ 188.568638] r8169 0000:02:00.0 enp2s0: Link is Down
[ 191.569052] r8169 0000:02:00.0 enp2s0: Link is Up - 1Gbps/Full - flow control off
[ 191.569069] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[ 192.894966] rfkill: input handler disabled
[ 194.177714] kauditd_printk_skb: 16 callbacks suppressed
[ 194.177717] audit: type=1400 audit(1648407902.816:28): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=1442 comm="cups-browsed" capability=23 capname="sys_nice"

[ 218.052753] No Local Variables are initialized for Method [ECMD]

[ 218.052760] Initialized Arguments for Method [ECMD]: (1 arguments defined for method invocation)
[ 218.052763] Arg0: 0000000077e476a1 <Obj> Integer 000000000000001A

[ 218.052788] ACPI Error: Aborting method \_SB.PCI0.LPCB.H_EC.ECMD due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/psparse-529)
[ 218.052818] ACPI Error: Aborting method \_TZ.FNCL due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/psparse-529)
[ 218.052842] ACPI Error: Aborting method \_TZ.FN01._ON due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/psparse-529)
[ 228.041616] systemd-journald[398]: Failed to read journal file /var/log/journal/d29a0fe47ff58a77c604fe7a623b8801/user-1000.journal for rotation, trying to move it out of the way: Device or resource busy

[ 248.072761] No Local Variables are initialized for Method [ECMD]

[ 248.072763] Initialized Arguments for Method [ECMD]: (1 arguments defined for method invocation)
[ 248.072763] Arg0: 00000000e3dc4705 <Obj> Integer 000000000000001A

[ 248.072770] ACPI Error: Aborting method \_SB.PCI0.LPCB.H_EC.ECMD due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/psparse-529)
[ 248.072777] ACPI Error: Aborting method \_TZ.FNCL due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/psparse-529)
[ 248.072783] ACPI Error: Aborting method \_TZ.FN04._ON due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/psparse-529)

[ 278.088065] No Local Variables are initialized for Method [ECMD]

[ 278.088072] Initialized Arguments for Method [ECMD]: (1 arguments defined for method invocation)
[ 278.088076] Arg0: 00000000f39d229b <Obj> Integer 000000000000001A

[ 278.088099] ACPI Error: Aborting method \_SB.PCI0.LPCB.H_EC.ECMD due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/psparse-529)
[ 278.088126] ACPI Error: Aborting method \_TZ.FNCL due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/psparse-529)
[ 278.088153] ACPI Error: Aborting method \_TZ.FN02._ON due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/psparse-529)

[ 308.103953] No Local Variables are initialized for Method [ECMD]

[ 308.103957] Initialized Arguments for Method [ECMD]: (1 arguments defined for method invocation)
[ 308.103959] Arg0: 00000000419f7ba3 <Obj> Integer 000000000000001A

[ 308.103973] ACPI Error: Aborting method \_SB.PCI0.LPCB.H_EC.ECMD due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/psparse-529)
[ 308.103989] ACPI Error: Aborting method \_TZ.FNCL due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/psparse-529)
[ 308.104002] ACPI Error: Aborting method \_TZ.FN00._ON due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/psparse-529)

[ 338.120537] No Local Variables are initialized for Method [ECMD]

[ 338.120545] Initialized Arguments for Method [ECMD]: (1 arguments defined for method invocation)
[ 338.120548] Arg0: 00000000d65eb0c4 <Obj> Integer 000000000000001A

[ 338.120573] ACPI Error: Aborting method \_SB.PCI0.LPCB.H_EC.ECMD due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/psparse-529)
[ 338.120603] ACPI Error: Aborting method \_TZ.FNCL due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/psparse-529)
[ 338.120627] ACPI Error: Aborting method \_TZ.FN03._ON due to previous error (AE_AML_LOOP_TIMEOUT) (20210930/psparse-529)
[ 366.736312] Bluetooth: RFCOMM TTY layer initialized
[ 366.736318] Bluetooth: RFCOMM socket layer initialized
[ 366.736323] Bluetooth: RFCOMM ver 1.11
[ 366.912841] rfkill: input handler enabled
[ 370.499393] rfkill: input handler disabled
[ 391.795589] usb 1-3: new high-speed USB device number 7 using xhci_hcd
[ 391.944595] usb 1-3: New USB device found, idVendor=0781, idProduct=5567, bcdDevice= 1.00
[ 391.944610] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 391.944616] usb 1-3: Product: Cruzer Blade
[ 391.944621] usb 1-3: Manufacturer: SanDisk
[ 391.944624] usb 1-3: SerialNumber: 4C530001250713116264
[ 391.970679] usb-storage 1-3:1.0: USB Mass Storage device detected
[ 391.970880] scsi host3: usb-storage 1-3:1.0
[ 391.970958] usbcore: registered new interface driver usb-storage
[ 391.973926] usbcore: registered new interface driver uas
[ 392.972856] scsi 3:0:0:0: Direct-Access SanDisk Cruzer Blade 1.00 PQ: 0 ANSI: 6
[ 392.975655] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 392.976636] sd 3:0:0:0: [sdc] 31260672 512-byte logical blocks: (16.0 GB/14.9 GiB)
[ 392.977404] sd 3:0:0:0: [sdc] Write Protect is off
[ 392.977407] sd 3:0:0:0: [sdc] Mode Sense: 43 00 00 00
[ 392.977775] sd 3:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 392.988036] sdc: sdc1 sdc2 sdc3
[ 392.993210] sd 3:0:0:0: [sdc] Attached SCSI removable disk
[ 393.361760] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 393.408832] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 393.427673] ISO 9660 Extensions: RRIP_1991A
[ 393.438032] EXT4-fs (sdc3): recovery complete
[ 393.447235] EXT4-fs (sdc3): mounted filesystem with ordered data mode. Opts: errors=remount-ro. Quota mode: none.
[ 822.540971] r8169 0000:02:00.0 enp2s0: Link is Down
[ 826.221517] r8169 0000:02:00.0 enp2s0: Link is Up - 1Gbps/Full - flow control off
[ 838.586222] r8169 0000:02:00.0 enp2s0: Link is Down
[ 846.690003] r8169 0000:02:00.0 enp2s0: Link is Up - 1Gbps/Full - flow control off
[ 851.353900] r8169 0000:02:00.0 enp2s0: Link is Down
[ 855.091983] r8169 0000:02:00.0 enp2s0: Link is Up - 1Gbps/Full - flow control off
[ 905.685091] r8169 0000:02:00.0 enp2s0: Link is Down
[ 909.352806] r8169 0000:02:00.0 enp2s0: Link is Up - 1Gbps/Full - flow control off
[ 935.598938] r8169 0000:02:00.0 enp2s0: Link is Down
[ 943.752538] r8169 0000:02:00.0 enp2s0: Link is Up - 1Gbps/Full - flow control off
[ 973.282590] r8169 0000:02:00.0 enp2s0: Link is Down
[ 977.045082] r8169 0000:02:00.0 enp2s0: Link is Up - 1Gbps/Full - flow control off[/CODE]
@OzgunP

Komutun çıktısını paylaş.

OzgunP dedi:

Komutun çıktısını paylaş.

Kod:Panoya kopyala

cat /proc/cmdline

Genişletmek için tıkla...

[CODE title="cat /proc/cmdline"]enes@casper:~$ cat /proc/cmdline
initrd=\EFI\Pop_OS-137fdee1-cf24-4a66-9b8f-9e549ee46ebf\initrd.img root=UUID=137fdee1-cf24-4a66-9b8f-9e549ee46ebf ro loglevel=1 quiet pci=noaer thermal.crt=200 systemd.show_status=false splash
enes@casper:~$
[/CODE]

e.n.e.s dedi:

loglevel=1

Genişletmek için tıkla...

loglevel=3 yapınca ne oluyor sonuç?

OzgunP dedi:

3 yapınca ne oluyor sonuç?

Genişletmek için tıkla...

Yine aynı olmuştu.
Yine denedim süre 30 saniye civarı daha azaldı ve açılışta klavyenin aktifleşmesi biraz daha kısa sürdü.


[CODE title="systemd-analyze"]enes@casper:~$ systemd-analyze
Startup finished in 8.838s (firmware) + 1.034s (loader) + 2min 34.602s (kernel) + 9.248s (userspace) = 2min 53.724s
graphical.target reached after 9.236s in userspace
enes@casper:~$
[/CODE]
Buradan anlaşılana göre ACPI Error yazıları biraz daha azalmış.

[CODE title="journalctl -p 3 -xb"]enes@casper:~$ journalctl -p 3 -xb
-- Journal begins at Wed 2022-03-23 23:59:19 +03, ends at Sun 2022-03-27 22:05:>
Mar 27 20:57:28 casper kernel: x86/cpu: SGX disabled by BIOS.
Mar 27 20:57:28 casper kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.H_EC.>
Mar 27 20:57:28 casper kernel: ACPI Error: Aborting method \_TZ.FNCL due to pre>
Mar 27 20:57:28 casper kernel: ACPI Error: Aborting method \_TZ.FN00._OFF due t>
Mar 27 20:57:28 casper kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.H_EC.>
Mar 27 20:57:28 casper kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.H_EC.>
Mar 27 20:57:28 casper kernel: ACPI Error: Aborting method \_TZ.FNCL due to pre>
Mar 27 20:57:28 casper kernel: ACPI Error: Aborting method \_TZ.FN01._ON due to>
Mar 27 20:57:28 casper kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.H_EC.>
Mar 27 20:57:28 casper kernel: ACPI Error: Aborting method \_TZ.FNCL due to pre>
Mar 27 20:57:28 casper kernel: ACPI Error: Aborting method \_TZ.FN02._ON due to>
Mar 27 20:57:28 casper kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.H_EC.>
Mar 27 20:57:28 casper kernel: ACPI Error: Aborting method \_TZ.FNCL due to pre>
Mar 27 20:57:28 casper kernel: ACPI Error: Aborting method \_TZ.FN03._ON due to>
Mar 27 20:57:28 casper kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.H_EC.>
Mar 27 20:57:28 casper kernel: ACPI Error: Aborting method \_TZ.FNCL due to pre>
Mar 27 20:57:28 casper kernel: ACPI Error: Aborting method \_TZ.FN04._ON due to>
Mar 27 20:57:28 casper kernel:
Mar 27 20:57:59 casper kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.H_EC.>
Mar 27 20:57:59 casper kernel: ACPI Error: Aborting method \_TZ.FNCL due to pre>
Mar 27 20:57:59 casper kernel: ACPI Error: Aborting method \_TZ.FN01._ON due to>
Mar 27 20:58:29 casper kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.H_EC.>
lines 1-23
[/CODE]
En alttaki çıktının tamamını atmamışım, anlaşılan hiçbir şey değişmemiş .
Şöyle bir şey buldum, denedim ama bir adımı atlamışım sanırım. Boş zamanımda tekrar deneyeceğim.
Burada adamın yazdığından anladığım hataya neden olan bütün ACPI varlıklarını (?) silip açılışta oluşan ACPI hatalarını önlemek.
Hatta şöyle düzelteyim, ham dsdt dosyasını alıp içindeki hataya neden olan ACPI'leri silip bu dsdt dosyasını acpi_override isimli bir dosyaya sıkıştırıp ya da dönüştürüp (?) sistem açılırken o dosya üzerinden hata ayıklama yapmasını sağlamak (?).