Çözüldü Ryzen 3600 sistem PAGE_FAULT_IN_NONPAGED_AREA hatası

Bu konu çözüldü olarak işaretlenmiştir. Çözülmediğini düşünüyorsanız konuyu rapor edebilirsiniz.
İşletim sistemi
Windows 10

Sarilimon

Centipat
Katılım
23 Ekim 2021
Mesajlar
98
Çözümler
1
Daha fazla  
Cinsiyet
Erkek
  • ASUS TUF Gaming B350M Plus.
  • AMD Ryzen 3600.
  • AMD Radeon RX 590 Sapphire Nitro+ 8 GB
  • Aerocool KCAS 600W 80+ Bronze
  • Kingston 8 GB HyperX Fury Black DDR4 3200MHz
  • 2, RAM Corsair red Vengeance LPX 8 GB 2400MHz.

  • Konu acmadan önce bir araştirma yaptim Memtest86 ile RAM teste sokdum 2, 40 dk sonra hiçbir sorun bulunmadi.
  • M.2 ve HDD teste soktum onlarda da hiçbir son bulamadim.
  • Aldigim hatalar 2020'den beri devam ediyor ama son aylarda sıklikla vermeye başlamiştir. PC resetlemelerden sonra cekilmez bir hal almiştir.
  • İşlemci sıcakligin düşürmek için Aerocool Cylon 4F sogutucu aldim sorunun devam ettiğini görünce 84 derece olan ekran kartimi macun değişimi yaptim 78 dereceleri görüyor.

4 defa format atmama rağmen hala mavi ekran ve reset vermeye devam ediyor.​

Aldigim hatalar:

  • Driver portıon mustbe nonpaged
  • dxgmms2.sys
  • Page faul ın nonpaged area
  • Dpc wachdog violation
  • Underpel ted kernel mode trap
  • DRIVER_OVERRAN_STACK_BUFFER
  • System thread
  • Irol not less orequal XL
  • Kernel Auto Boost

 
Son düzenleyen: Moderatör:
Çözüm
Kargo bayrama takildi pazartesi elime ulaşir temiz kurulumdan sonra inşallah. Sorun halolmuş olur.

Orijinal Windows kullanmıyorsanız güncellemeleri alamazsanız.

Güncel sürüm: Windows 10 kod adı: 22H2 yapı numarası: 19045'dir.

Sorun cözüldü işemcim arzaliymiş exstradan RAM anakart M.2 güc kaynagive ekran karti deyişimi yabdim miraz masraf oldu ama gücelenmiş oldu 2 yil sonra gelen huzur :D
Anakarti deyişe mi?
Kesin bir şey diyemem hocam valla. Başka bir uzman varsa yanıtlasın. Tek tek denemek zorundasın. Anakartta problem de olmayabilir. Belki halen yazılımsalda olabilir. Ben çözemedim. Son attığın DMP'ların bir tanesinde USB aygıt gözüküyor birinde monitör gözüküyor anlayamadım.
 
Hdm geçtim USB uzaticilarinida cikartim 120 Hz monitörü sabitledim

Rutin mavi ekranlardan kurtulamadim.
Sabah PC acarken 40 dk boyun PC kendini mavi ekran ve resetliyor 40 sonra uyana akdar sorunsuz calişiyor.
 
Hdm geçtim USB uzaticilarinida cikartim 120 Hz monitörü sabitledim

Rutin mavi ekranlardan kurtulamadim.
Sabah PC acarken 40 dk boyun PC kendini mavi ekran ve resetliyor 40 sonra uyana akdar sorunsuz calişiyor.
Dump dosyalarını atın buraya farklı bir şey var mı diye bakayım istiyorsanız.
 
ilk
2.cisi
3,
KERNEL_AUTO_BOOST_LOCK_ACQUISITION_WITH_RAISED_IRQL (192)
A lock tracked by AutoBoost was acquired while executing at DISPATCH_LEVEL or
above.
Arguments:
Arg1: ffffa60c3a0cd080, The address of the thread.
Arg2: ffff8f8a54a57e98, The lock address.
Arg3: 0000000000000000, The IRQL at which the lock was acquired.
Arg4: 0000000000000000, Reserved.

Debugging Details:
------------------

*** WARNING: Unable to verify timestamp for win32k.sys

KEY_VALUES_STRING: 1

Key : Analysis.CPU.mSec
Value: 2296

Key : Analysis.DebugAnalysisManager
Value: Create

Key : Analysis.Elapsed.mSec
Value: 38803

Key : Analysis.Init.CPU.mSec
Value: 249

Key : Analysis.Init.Elapsed.mSec
Value: 4603

Key : Analysis.Memory.CommitPeak.Mb
Value: 80

Key : WER.OS.Branch
Value: vb_release

Key : WER.OS.Timestamp
Value: 2019-12-06T14:06:00Z

Key : WER.OS.Version
Value: 10.0.19041.1


FILE_IN_CAB: 111321-7156-01.dmp

BUGCHECK_CODE: 192

BUGCHECK_P1: ffffa60c3a0cd080

BUGCHECK_P2: ffff8f8a54a57e98

BUGCHECK_P3: 0

BUGCHECK_P4: 0

BLACKBOXBSD: 1 (!blackboxbsd)


BLACKBOXNTFS: 1 (!blackboxntfs)


BLACKBOXPNP: 1 (!blackboxpnp)


BLACKBOXWINLOGON: 1

CUSTOMER_CRASH_COUNT: 1

PROCESS_NAME: LOSTARK.exe

STACK_TEXT:
fffff880`81767818 fffff806`12607c0b : 00000000`00000192 ffffa60c`3a0cd080 ffff8f8a`54a57e98 00000000`00000000 : nt!KeBugCheckEx
fffff880`81767820 fffff806`21824919 : ffffa60c`3448c080 fffff880`817679f0 ffffa60c`00000000 ffffa60c`3b87d610 : nt!ExAcquirePushLockExclusiveEx+0x14b
fffff880`81767860 fffff806`217c18f9 : fffff880`81767b80 ffff8f8a`53f8e830 ffff8f8a`43fddf90 ffffffff`ffffffff : dxgmms2!VIDMM_GLOBAL::Lock+0x1f9
fffff880`81767920 fffff806`1b631775 : 00000000`00000001 fffff880`81767b80 ffffffff`ffffffff ffff8f8a`5b681810 : dxgmms2!VidMmLock+0x9
fffff880`81767950 fffff806`12808cb8 : 00000000`0000001e ffffa60c`3a0cd080 00000117`a0068910 00000000`00000000 : dxgkrnl!DxgkLock2+0x395
fffff880`81767b00 00007ffa`6c9e5024 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x28
00000006`488ff2f8 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x00007ffa`6c9e5024


SYMBOL_NAME: dxgmms2!VIDMM_GLOBAL::Lock+1f9

MODULE_NAME: dxgmms2

IMAGE_NAME: dxgmms2.sys

IMAGE_VERSION: 10.0.19041.1320

STACK_COMMAND: .cxr; .ecxr ; kb

BUCKET_ID_FUNC_OFFSET: 1f9

FAILURE_BUCKET_ID: 0x192_dxgmms2!VIDMM_GLOBAL::Lock

OS_VERSION: 10.0.19041.1

BUILDLAB_STR: vb_release

OSPLATFORM_TYPE: x64

OSNAME: Windows 10

FAILURE_ID_HASH: {57464d66-d68b-7837-473e-3d6c4f6245b8}

Followup: MachineOwner
---------

7: kd> lmvm dxgmms2
Browse full module list
start end module name
fffff806`217b0000 fffff806`21891000 dxgmms2 (pdb symbols) C:\ProgramData\Dbg\sym\dxgmms2.pdb\0CC456F22E8837C65BCC469B2D7225F91\dxgmms2.pdb
Loaded symbol image file: dxgmms2.sys
Mapped memory image file: C:\ProgramData\Dbg\sym\dxgmms2.sys\AF897EC9e1000\dxgmms2.sys
Image path: \SystemRoot\System32\drivers\dxgmms2.sys
Image name: dxgmms2.sys
Browse all global symbols functions data
Image was built with /Brepro flag.
Timestamp: AF897EC9 (This is a reproducible build file hash, not a timestamp)
CheckSum: 000E5675
ImageSize: 000E1000
File version: 10.0.19041.1320
Product version: 10.0.19041.1320
File flags: 0 (Mask 3F)
File OS: 40004 NT Win32
File type: 3.7 Driver
File date: 00000000.00000000
Translations: 0409.04b0
Information from resource tables:
CompanyName: Microsoft Corporation
ProductName: Microsoft® Windows® Operating System
InternalName: dxgmms2.sys
OriginalFilename: dxgmms2.sys
ProductVersion: 10.0.19041.1320
FileVersion: 10.0.19041.1320 (WinBuild.160101.0800)
FileDescription: DirectX Graphics MMS
LegalCopyright: © Microsoft Corporation. All rights reserved.
7: kd> !blackboxpnp
PnpActivityId : {00000000-0000-0000-0000-000000000000}
PnpActivityTime : 132812522874325240
PnpEventInformation: 0
PnpEventInProgress : 0
PnpProblemCode : 22
PnpVetoType : 0
DeviceId : PCI\VEN_1002&DEV_AAF0&SUBSYS_AAF01DA2&REV_00\4&1fc990d7&0&0119
VetoString :
UNEXPECTED_KERNEL_MODE_TRAP (7f)
This means a trap occurred in kernel mode, and it's a trap of a kind
that the kernel isn't allowed to have/catch (bound trap) or that
is always instant death (double fault). The first number in the
BugCheck params is the number of the trap (8 = double fault, etc)
Consult an Intel x86 family manual to learn more about what these
traps are. Here is a *portion* of those codes:
If kv shows a taskGate
use .tss on the part before the colon, then kv.
Else if kv shows a trapframe
use .trap on that value
Else
.trap on the appropriate frame will show where the trap was taken
(on x86, this will be the ebp that goes with the procedure KiTrap)
Endif
kb will then show the corrected stack.
Arguments:
Arg1: 0000000000000008, EXCEPTION_DOUBLE_FAULT
Arg2: ffffac01a239de70
Arg3: 00000000579007d0
Arg4: fffff80739408657

Debugging Details:
------------------

*** WARNING: Unable to verify checksum for win32k.sys

KEY_VALUES_STRING: 1

Key : Analysis.CPU.mSec
Value: 2812

Key : Analysis.DebugAnalysisManager
Value: Create

Key : Analysis.Elapsed.mSec
Value: 20366

Key : Analysis.Init.CPU.mSec
Value: 187

Key : Analysis.Init.Elapsed.mSec
Value: 3870

Key : Analysis.Memory.CommitPeak.Mb
Value: 74

Key : WER.OS.Branch
Value: vb_release

Key : WER.OS.Timestamp
Value: 2019-12-06T14:06:00Z

Key : WER.OS.Version
Value: 10.0.19041.1


FILE_IN_CAB: 111321-8390-01.dmp

BUGCHECK_CODE: 7f

BUGCHECK_P1: 8

BUGCHECK_P2: ffffac01a239de70

BUGCHECK_P3: 579007d0

BUGCHECK_P4: fffff80739408657

TRAP_FRAME: ffffac01a239de70 -- (.trap 0xffffac01a239de70)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=00000000000000f9 rbx=0000000000000000 rcx=0000000000000000
rdx=0000000000000000 rsi=0000000000000000 rdi=0000000000000000
rip=fffff80739408657 rsp=00000000579007d0 rbp=ffff880f2b0da080
r8=0000000000000001 r9=0000000000000000 r10=0000000000000000
r11=ffff808c57900738 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei pl nz na pe nc
nt!ExReleaseResourceLite+0x117:
fffff807`39408657 5d pop rbp
Resetting default scope

BLACKBOXBSD: 1 (!blackboxbsd)


BLACKBOXNTFS: 1 (!blackboxntfs)


BLACKBOXPNP: 1 (!blackboxpnp)


BLACKBOXWINLOGON: 1

CUSTOMER_CRASH_COUNT: 1

PROCESS_NAME: LOSTARK.exe

STACK_TEXT:
ffffac01`a239dd28 fffff807`39609269 : 00000000`0000007f 00000000`00000008 ffffac01`a239de70 00000000`579007d0 : nt!KeBugCheckEx
ffffac01`a239dd30 fffff807`39604083 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiBugCheckDispatch+0x69
ffffac01`a239de70 fffff807`39408657 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiDoubleFaultAbort+0x2c3
00000000`579007d0 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!ExReleaseResourceLite+0x117


SYMBOL_NAME: nt!KiDoubleFaultAbort+2c3

MODULE_NAME: nt

IMAGE_NAME: ntkrnlmp.exe

IMAGE_VERSION: 10.0.19041.1348

STACK_COMMAND: .cxr; .ecxr ; kb

BUCKET_ID_FUNC_OFFSET: 2c3

FAILURE_BUCKET_ID: 0x7f_8_nt!KiDoubleFaultAbort

OS_VERSION: 10.0.19041.1

BUILDLAB_STR: vb_release

OSPLATFORM_TYPE: x64

OSNAME: Windows 10

FAILURE_ID_HASH: {d1f8395a-8c58-45da-6ebf-e8bb4aad2fc5}

Followup: MachineOwner
---------

10: kd> !blackboxpnp
PnpActivityId : {00000000-0000-0000-0000-000000000000}
PnpActivityTime : 132812508991763293
PnpEventInformation: 0
PnpEventInProgress : 0
PnpProblemCode : 22
PnpVetoType : 0
DeviceId : PCI\VEN_1002&DEV_AAF0&SUBSYS_AAF01DA2&REV_00\4&1fc990d7&0&0119
VetoString :
SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the BugCheck
Arg2: fffff80617c3ee5c, Address of the instruction which caused the BugCheck
Arg3: ffff9f80cdf8f920, Address of the context record for the exception that caused the BugCheck
Arg4: 0000000000000000, zero.

Debugging Details:
------------------

*** WARNING: Unable to verify checksum for win32k.sys

KEY_VALUES_STRING: 1

Key : Analysis.CPU.mSec
Value: 1812

Key : Analysis.DebugAnalysisManager
Value: Create

Key : Analysis.Elapsed.mSec
Value: 7930

Key : Analysis.Init.CPU.mSec
Value: 187

Key : Analysis.Init.Elapsed.mSec
Value: 6492

Key : Analysis.Memory.CommitPeak.Mb
Value: 74

Key : WER.OS.Branch
Value: vb_release

Key : WER.OS.Timestamp
Value: 2019-12-06T14:06:00Z

Key : WER.OS.Version
Value: 10.0.19041.1


FILE_IN_CAB: 111321-9140-01.dmp

BUGCHECK_CODE: 3b

BUGCHECK_P1: c0000005

BUGCHECK_P2: fffff80617c3ee5c

BUGCHECK_P3: ffff9f80cdf8f920

BUGCHECK_P4: 0

CONTEXT: ffff9f80cdf8f920 -- (.cxr 0xffff9f80cdf8f920)
rax=00040000000013bf rbx=0000000000000000 rcx=0000000fffffffff
rdx=ffff8f8003a1eb22 rsi=0000001000000000 rdi=0000000000135f90
rip=fffff80617c3ee5c rsp=ffff898cd808aa10 rbp=ffff8f8003a1edd0
r8=ffff8f8003a1eb28 r9=000000000000009f r10=0000000000135f90
r11=fffff80618650c40 r12=0000000000000000 r13=ffff8f8003a1eb00
r14=0000000003a1eb00 r15=ffff8f8003a1ee00
iopl=0 nv up ei ng nz ac pe cy
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00050293
nt!MiCoalesceFreePages+0x4c:
fffff806`17c3ee5c 0200 add al,byte ptr [rax] ds:002b:00040000`000013bf=??
Resetting default scope

BLACKBOXBSD: 1 (!blackboxbsd)


BLACKBOXNTFS: 1 (!blackboxntfs)


BLACKBOXPNP: 1 (!blackboxpnp)


BLACKBOXWINLOGON: 1

CUSTOMER_CRASH_COUNT: 1

PROCESS_NAME: opera.exe

MISALIGNED_IP:
nt!MiCoalesceFreePages+4c
fffff806`17c3ee5c 0200 add al,byte ptr [rax]

STACK_TEXT:
ffff898c`d808aa10 fffff806`17c3e455 : 00000000`00000000 00000000`00000000 ffff898c`d808abb9 ffff8f80`03a1edd0 : nt!MiCoalesceFreePages+0x4c
ffff898c`d808ab00 fffff806`17c3aed7 : 00000000`00135f9f 80000000`00000000 00000000`00000001 00000000`0000009f : nt!MiInsertPageInFreeOrZeroedList+0x3d5
ffff898c`d808ac20 fffff806`17cb0b0e : ffff898c`d808b050 ffffb10e`1ceec200 00000000`00000000 ffff898c`d808b910 : nt!MiDeletePteList+0x547
ffff898c`d808ad00 fffff806`17ffa1ed : ffffb10e`1ed1e080 ffffb10e`1cbdaeb8 00000000`00000000 00000000`00000000 : nt!MiDecommitPages+0x124e
ffff898c`d808b8d0 fffff806`17ff9853 : ffff898c`d808ba50 00000000`00000000 ffff898c`d808ba50 ffffb10e`1cbdae90 : nt!MiDecommitRegion+0x7d
ffff898c`d808b950 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!MmFreeVirtualMemory+0x6d3


SYMBOL_NAME: nt!MiCoalesceFreePages+4c

IMAGE_VERSION: 10.0.19041.1348

STACK_COMMAND: .cxr 0xffff9f80cdf8f920 ; kb

IMAGE_NAME: hardware

MODULE_NAME: hardware

FAILURE_BUCKET_ID: IP_MISALIGNED

OS_VERSION: 10.0.19041.1

BUILDLAB_STR: vb_release

OSPLATFORM_TYPE: x64

OSNAME: Windows 10

FAILURE_ID_HASH: {201b0e5d-db2a-63d2-77be-8ce8ff234750}

Followup: MachineOwner
---------

1.sinde DirectX sürücülerinde hata meydana gelmiş.( Ekran kartı )
2.sinde PCI yolunu kullanan bir donanımda hata var gibi.( Ekran kartı, NVMe SSD , Onboard Ses kartı)
3.sü zaten donanım hatasını işaret etmiş.
 
Son düzenleme:

Geri
Yukarı