Upgrading Iomega ix2-200 to Cloud Edition


BuToNz

Kilopat
Katılım
24 Şubat 2012
Mesajlar
1
Beğeniler
1
Hey guys, trying to get the firmware...Unfortunately the Rapidshare link is VERY slow, tried for the last couple of days and barely get above 10kbps and the Megaupload site has been taken down (Thankyou ACTA)

Can someone upload a new link? Many many thanks!

EDIT: Nevermind! New link here: http://www.sendspace.com/file/r0ego5
 
Son düzenleyen: Moderatör:

KAR

Hectopat
Katılım
23 Şubat 2012
Mesajlar
3
Beğeniler
0
The disks are 100% the same, will use another USB tomorrow (I have to order some)

Thx for your update

KAR

Tried 4 Different USB stick only 2 of them are blinking,but thats all no files extracted at the USB and not at the disks. Looks like the 320 GB disk are not working.

Does anybody have a ghostimage of the 2 disks, using a ghost image I can restore both disks (320 GB) in the correct state??

Thx,
KAR
 

axukar

Hectopat
Katılım
11 Ocak 2012
Mesajlar
16
Beğeniler
3
hi guys,
which usb port are you trying to use?i have a friend that only work with the front usb...is only a guess!

one question...the transmission works okay in ix2-200?

cheers
 

sopbrain

Hectopat
Katılım
4 Mart 2012
Mesajlar
3
Beğeniler
0
hi,
i have a ix2-200 1Tb (2x500Gb) non-cloud converted to cloud.
i have installed firmware 3.2.3.9273, but i have a problem, if the NAS not correctly shutdown (example: unplug power), the NAS start wrong with white led blinking in any reboot, and cannot access by http, https or SMB... only response ping (ICMP) and SSH.

the solution that i was find is log by SSH and execute: shutdown -h now, when start the NAS again, its start well.

have the same problem somebody?

in firmware 3.1.14 this didn't happen

update: after updating the firmware v3.1.14 to v3.2.3.15290 the problem don't occurred anymore

Regards
 
Son düzenleyen: Moderatör:

Recep Baltaş

Technopat
Yönetici
Katılım
14 Ağustos 2010
Mesajlar
68.488
Çözümler
816
Beğeniler
93.363
Yer
İstanbul
Then it is a FW problem. Send feedback to iomega please ;)
 

axukar

Hectopat
Katılım
11 Ocak 2012
Mesajlar
16
Beğeniler
3
hi,
i have a ix2-200 1Tb (2x500Gb) non-cloud converted to cloud.
i have installed firmware 3.2.3.9273, but i have a problem, if the NAS not correctly shutdown (example: unplug power), the NAS start wrong with white led blinking in any reboot, and cannot access by http, https or SMB... only response ping (ICMP) and SSH.

the solution that i was find is log by SSH and execute: shutdown -h now, when start the NAS again, its start well.

have the same problem somebody?

in firmware 3.1.14 this didn't happen

Regards

hi guys,

Some times happen the same with me but if you unpluged the calbe power and press the power button for 15 seconds and then connect the power cable again the NAS start normally.
Works with me....

cheers
 



Yukarı