Daha fazla
- Cinsiyet
- Erkek
- Profil Kapağı
- 1522743131
Can you reinstall the firmware via interface? I have no idea about this problem. Also please Ctrl + F5 your browser.
Guys,
The update for cloud version worked fine, but the RAID volume didn´t mount. When I tried to change RAID configuration to RAID0, or any other option, it was saying the pool needed a name.
I´ve made the update proccess 5 times, always the same result.
Then I tried to update to firmware ix2-200-3.2.3.9273 , and everything looked to be running nice, but after the unit restarted, the white led was blinking, and I had no access to web interface.
I tought it was remounting the RAID, so I let it running for more then 12 hours. After that, I´ve noticed something was wrong.
Since then, I can update the unit anymore, with any firmware.
I´ve tried:
1) removing 1st and 2nd disk (alternated)
2) clearing the disks
3) changing for new disks
4) I ran DriveFWUpdater-1.8.exe from iomega
When doing the reset as described, the unit restarts, the disks speens, and the USB led blinks twice, but then, nothing else, except the White Led of DEATH.....
Does anyone have an Idea what may I do?
Thanks to all,
Caco
I belive you did not format the drives before the upgrade or your disks are not the same. No one had a problem with the RAID before.
after my update when i started after the third time it bloked and i needed to do a reset like this one that i saw in this post....
I have the same problem with my new ix2 ... rapidly blinking white led.
I contacted support who suggested the following 3 solutions ...
Solution 1
First, please try power cycling the device. To do this, whilst the unit is on, pull the power cable directly from the unit. Then keep the power button held in for 15 seconds.
After that ,reconnect the power cable and boot the device. Does this change the LED Status at all?
Solution 2
Please try and reset the device to factory defaults. This is performed by pressing and keeping the reset button held in for 15 seconds
Let me know the exact response you get when doing this.
Solution3
Please try booting the unit with only 1 disk in the second slot. Let me know how this goes. (will not invalidate any warranty)
None of these solutions worked in my case, but they might work for others?
Can you reinstall the firmware via interface? I have no idea about this problem. Also please Ctrl + F5 your browser.
Bu sitenin çalışmasını sağlamak için gerekli çerezleri ve deneyiminizi iyileştirmek için isteğe bağlı çerezleri kullanıyoruz.